Copyright © 2005-2020 Jean-Francois Dockes
Permission is granted to copy,
            distribute and/or modify this document under the terms
            of the GNU Free Documentation License, Version 1.3 or
            any later version published by the Free Software
            Foundation; with no Invariant Sections, no Front-Cover
            Texts, and no Back-Cover Texts. A copy of the license
            can be found at the following location: GNU web site.
This document introduces full text search notions and describes the installation and use of the Recoll application. This version describes Recoll 1.31.
Table of Contents
ptrans fileList of Tables
This document introduces full text search notions and describes the installation and use of the Recoll application. It is updated for Recoll 1.31.
Recoll was for a long
      time dedicated to Unix-like systems. It was only lately
      (2015) ported to MS-Windows.
      Many references in this manual, especially file locations,
      are specific to Unix, and not valid on Windows, where some described features
      are also not available. The manual will be progressively
      updated. Until this happens, on Windows, most references to shared files
      can be translated by looking under the Recoll installation
      directory (Typically C:/Program Files
      (x86)/Recoll, esp. anything referenced in /usr/share in this document will be found
      int the Share subdirectory).
      The user configuration is stored by default under
      AppData/Local/Recoll inside the
      user directory, along with the index itself.
If you do not like reading manuals (who does?) but wish to give Recoll a try, just install the application and start the recoll graphical user interface (GUI), which will ask permission to index your home directory, allowing you to search immediately after indexing completes.
Do not do this if your home directory contains a huge number of documents and you do not want to wait or are very short on disk space. In this case, you may first want to customize the configuration to restrict the indexed area (shortcut: from the recoll GUI go to: → , then adjust the Top directories section).
On Unix-like systems, you may need to install the appropriate supporting applications for document types that need them (for example antiword for Microsoft Word files). The Recoll for Windows package is self-contained and includes most useful auxiliary programs.
Recoll is a full text search application, which means that it finds your data by content rather than by external attributes (like the file name). You specify words (terms) which should or should not appear in the text you are looking for, and receive in return a list of matching documents, ordered so that the most relevant documents will appear first.
You do not need to remember in what file or email message you stored a given piece of information. You just ask for related terms, and the tool will return a list of documents where these terms are prominent, in a similar way to Internet search engines.
Full text search applications try to determine which documents are most relevant to the search terms you provide. Computer algorithms for determining relevance can be very complex, and in general are inferior to the power of the human mind to rapidly determine relevance. The quality of relevance guessing is probably the most important aspect when evaluating a search application. Recoll relies on the Xapian probabilistic information retrieval library to determine relevance.
In many cases, you are looking for all the forms of a
        word, including plurals, different tenses for a verb, or
        terms derived from the same root or stem (example: floor, floors, floored,
        flooring...). Queries are usually automatically
        expanded to all such related terms (words that reduce to
        the same stem). This can be prevented for searching for a
        specific form.
Stemming, by itself, does not accommodate for
        misspellings or phonetic searches. A full text search
        application may also support this form of approximation.
        For example, a search for aliterattion returning no
        result might propose alliteration, alteration, alterations,
        or altercation as possible replacement terms.
        Recoll bases its
        suggestions on the actual index contents, so that
        suggestions may be made for words which would not appear in
        a standard dictionary.
Recoll uses the Xapian information retrieval library as its storage and retrieval engine. Xapian is a very mature package using a sophisticated probabilistic ranking model.
The Xapian library manages an index database which describes where terms appear in your document files. It efficiently processes the complex queries which are produced by the Recoll query expansion mechanism, and is in charge of the all-important relevance computation task.
Recoll provides the mechanisms and interface to get data into and out of the index. This includes translating the many possible document formats into pure text, handling term variations (using Xapian stemmers), and spelling approximations (using the aspell speller), interpreting user queries and presenting results.
In a shorter way, Recoll does the dirty footwork, Xapian deals with the intelligent parts of the process.
The Xapian index can be big (roughly the size of the original document set), but it is not a document archive. Recoll can only display documents that still exist at the place from which they were indexed.
Recoll stores all internal data in Unicode UTF-8 format, and it can index many types of files with different character sets, encodings, and languages into the same index. It can process documents embedded inside other documents (for example a PDF document stored inside a Zip archive sent as an email attachment...), down to an arbitrary depth.
Stemming is the process by which Recoll reduces words to their radicals so that searching does not depend, for example, on a word being singular or plural (floor, floors), or on a verb tense (flooring, floored). Because the mechanisms used for stemming depend on the specific grammatical rules for each language, there is a separate Xapian stemmer module for most common languages where stemming makes sense.
Recoll stores the unstemmed versions of terms in the main index and uses auxiliary databases for term expansion (one for each stemming language), which means that you can switch stemming languages between searches, or add a language without needing a full reindex.
Storing documents written in different languages in the same index is possible, and commonly done. In this situation, you can specify several stemming languages for the index.
Recoll currently makes no attempt at automatic language recognition, which means that the stemmer will sometimes be applied to terms from other languages with potentially strange results. In practise, even if this introduces possibilities of confusion, this approach has been proven quite useful, and it is much less cumbersome than separating your documents according to what language they are written in.
By default, Recoll
        strips most accents and diacritics from terms, and converts
        them to lower case before either storing them in the index
        or searching for them. As a consequence, it is impossible
        to search for a particular capitalization of a term
        (US / us), or to discriminate two terms based on
        diacritics (sake /
        saké, mate / maté).
Recoll can optionally store the raw terms, without accent stripping or case conversion. In this configuration, default searches will behave as before, but it is possible to perform searches sensitive to case and diacritics. This is described in more detail in the section about index case and diacritics sensitivity.
Recoll uses many
        parameters to define exactly what to index, and how to
        classify and decode the source documents. These are kept in
        configuration files. A
        default configuration is copied into a standard location
        (usually something like /usr/share/recoll/examples) during
        installation. The default values set by the configuration
        files in this directory may be overridden by values set
        inside your personal configuration. With the default
        configuration, Recoll will
        index your home directory with generic parameters. Most
        common parameters can be set by using configuration menus
        in the recoll
        GUI. Some less common parameters can only be set by editing
        the text files (the new values will be preserved by the
        GUI).
The indexing process is started automatically (after asking permission), the first time you execute the recoll GUI. Indexing can also be performed by executing the recollindex command. Recoll indexing is multithreaded by default when appropriate hardware resources are available, and can perform in parallel multiple tasks for text extraction, segmentation and index updates.
Searches are usually performed inside the recoll GUI, which has many options to help you find what you are looking for. However, there are other ways to query the index:
A Ubuntu Unity Scope module.
A Gnome Shell Search Provider.
Indexing is the process by which the set of documents is
        analyzed and the data entered into the database.
        Recoll indexing is
        normally incremental: documents will only be processed if
        they have been modified since the last run. On the first
        execution, all documents will need processing. A full index
        build can be forced later by specifying an option to the
        indexing command (recollindex -z or -Z).
recollindex skips files
        which caused an error during a previous pass. This is a
        performance optimization, and the command line option
        -k can be set to retry failed
        files, for example after updating an input handler.
The following sections give an overview of different aspects of the indexing processes and configuration, with links to detailed sections.
Depending on your data, temporary files may be needed
        during indexing, some of them possibly quite big. You can
        use the RECOLL_TMPDIR or
        TMPDIR environment variables to
        determine where they are created (the default is to use
        /tmp). Using TMPDIR has the nice property that it may
        also be taken into account by auxiliary commands executed
        by recollindex.
Recoll indexing can be performed along two main modes:
Periodic (or batch) indexing . recollindex is executed at discrete times. On Unix-like systems, the typical usage is to have a nightly run programmed into your cron file. On Windows, this is the only mode available, and the Windows Task Scheduler can be used to run indexing. In both cases, the GUI includes an easy interface to the system batch scheduler.
Real time indexing . (Only available on Unix-like systems). recollindex runs permanently as a daemon and uses a file system alteration monitor (e.g. inotify) to detect file changes. New or updated files are indexed at once. Monitoring a big file system tree can consume significant system resources.
The choice between the two methods is mostly a matter of preference, and they can be combined by setting up multiple indexes (ie: use periodic indexing on a big documentation directory, and real time indexing on a small home directory), or, with Recoll 1.24 and newer, by configuring the index so that only a subset of the tree will be monitored.
The choice of method and the parameters used can be configured from the recoll GUI: → dialog.
Recoll supports defining multiple indexes, each defined by its own configuration directory. A configuration directory contains several files which describe what should be indexed and how.
When recoll or recollindex is first
          executed, it creates a default configuration directory.
          This configuration is the one used for indexing and
          querying when no specific configuration is specified. It
          is located in $HOME/.recoll/ for Unix-like systems and %LOCALAPPDATA%\Recoll on Windows (typically C:\Users\[me]\Appdata\Local\Recoll).
All configuration parameters have defaults, defined in system-wide files. Without further customisation, the default configuration will process your complete home directory, with a reasonable set of defaults. It can be adjusted to process a different area of the file system, select files in different ways, and many other things.
In some cases, it may be useful to create additional configuration directories, for example, to separate personal and shared indexes, or to take advantage of the organization of your data to improve search precision.
In order to do this, you would create an empty
          directory in a location of your choice, and then instruct
          recoll or
          recollindex
          to use it by setting either a command line option
          (-c /some/directory), or an
          environment variable (RECOLL_CONFDIR=/some/directory). Any
          modification performed by the commands (e.g.
          configuration customisation or searches by recoll or index
          creation by recollindex) would then
          apply to the new directory and not to the default
          one.
Once multiple indexes are created, you can use each of
          them separately by setting the -c option or the RECOLL_CONFDIR environment variable when
          starting a command, to select the desired index.
It is also possible to instruct one configuration to query one or several other indexes in addition to its own, by using the function in the recoll GUI, or some other functions in the command line and programming tools.
A plausible usage scenario for the multiple index feature would be for a system administrator to set up a central index for shared data, that you choose to search or not in addition to your personal data. Of course, there are other possibilities. for example, there are many cases where you know the subset of files that should be searched, and where narrowing the search can improve the results. You can achieve approximately the same effect with the directory filter in advanced search, but multiple indexes may have better performance and may be worth the trouble in some cases.
A more advanced use case would be to use multiple index to improve indexing performance, by updating several indexes in parallel (using multiple CPU cores and disks, or possibly several machines), and then merging them, or querying them in parallel.
See the section about configuring multiple indexes for more detail
Recoll knows about quite a few different document types. The parameters for document types recognition and processing are set in configuration files.
Most file types, like HTML or word processing files, only hold one document. Some file types, like email folders or zip archives, can hold many individually indexed documents, which may themselves be compound ones. Such hierarchies can go quite deep, and Recoll can process, for example, a LibreOffice document stored as an attachment to an email message inside an email folder archived in a zip file...
recollindex processes plain text, HTML, OpenDocument (Open/LibreOffice), email formats, and a few others internally.
Other file types (ie: postscript, pdf, ms-word, rtf
          ...) need external applications for preprocessing. The
          list is in the installation section.
          After every indexing operation, Recoll updates a list of commands
          that would be needed for indexing existing files types.
          This list can be displayed by selecting the menu option
           →  in the
          recoll GUI.
          It is stored in the missing
          text file inside the configuration directory.
After installing a missing handler, you may need to
          tell recollindex to retry
          the failed files, by adding option -k to the command line, or by using the
          GUI  →  menu. This is
          because recollindex, in its
          default operation mode, will not retry files which caused
          an error during an earlier pass. In special cases, it may
          be useful to reset the data for a category of files
          before indexing. See the recollindex manual
          page. If your index is not too big, it may be simpler to
          just reset it.
By default, Recoll will try to index any file type that it has a way to read. This is sometimes not desirable, and there are ways to either exclude some types, or on the contrary define a positive list of types to be indexed. In the latter case, any type not in the list will be ignored.
Excluding files by name can be done by adding wildcard name patterns to the skippedNames list, which can be done from the GUI Index configuration menu. Excluding by type can be done by setting the excludedmimetypes list in the configuration file (1.20 and later). This can be redefined for subdirectories.
You can also define an exclusive list of MIME types to be indexed (no others will be indexed), by setting the indexedmimetypes configuration variable. Example:
        indexedmimetypes = text/html application/pdf
      
          It is possible to redefine this parameter for subdirectories. Example:
      [/path/to/my/dir]
      indexedmimetypes = application/pdf
    
          (When using sections like this, don't forget that they remain in effect until the end of the file or another section indicator).
excludedmimetypes or
          indexedmimetypes, can be set
          either by editing the 
          configuration file (recoll.conf) for the index, or by
          using the GUI index configuration tool.
When editing the indexedmimetypes or excludedmimetypes lists, you should
            use the MIME values listed in the mimemap file or in Recoll result
            lists in preference to file
            -i output: there are a number of differences.
            The file -i output should
            only be used for files without extensions, or for which
            the extension is not listed in mimemap
Indexing may fail for some documents, for a number of reasons: a helper program may be missing, the document may be corrupt, we may fail to uncompress a file because no file system space is available, etc.
The Recoll indexer in
          versions 1.21 and later does not retry failed files by
          default, because some indexing failures can be quite
          costly (for example failing to uncompress a big file
          because of insufficient disk space). Retrying will only
          occur if an explicit option (-k) is set on the recollindex command
          line, or if a script executed when recollindex starts up
          says so. The script is defined by a configuration
          variable (checkneedretryindexscript), and makes a
          rather lame attempt at deciding if a helper command may
          have been installed, by checking if any of the common
          bin directories have
          changed.
In the rare case where the index becomes corrupted
          (which can signal itself by weird search results or
          crashes), the index files need to be erased before
          restarting a clean indexing pass. Just delete the
          xapiandb directory (see
          next section), or,
          alternatively, start the next recollindex with the
          -z option, which will reset
          the database before indexing. The difference between the
          two methods is that the second will not change the
          current index format, which may be undesirable if a newer
          format is supported by the Xapian version.
The default location for the index data is the
        xapiandb subdirectory of the
        Recoll configuration
        directory, typically $HOME/.recoll/xapiandb/. This can be
        changed via two different methods (with different
        purposes):
For a given configuration directory, you can
              specify a non-default storage location for the index
              by setting the dbdir
              parameter in the configuration file (see the
              
              configuration section). This method would mainly
              be of use if you wanted to keep the configuration
              directory in its default location, but desired
              another location for the index, typically out of disk
              occupation or performance concerns.
You can specify a different configuration
              directory by setting the RECOLL_CONFDIR environment variable,
              or using the -c option to
              the Recoll commands.
              This method would typically be used to index
              different areas of the file system to different
              indexes. For example, if you were to issue the
              following command:
recoll -c ~/.indexes-email
Then Recoll would
              use configuration files stored in ~/.indexes-email/ and, (unless
              specified otherwise in recoll.conf) would look for the
              index in ~/.indexes-email/xapiandb/.
Using multiple configuration directories and configuration options allows you to tailor multiple configurations and indexes to handle whatever subset of the available data you wish to make searchable.
The size of the index is determined by the size of the set of documents, but the ratio can vary a lot. For a typical mixed set of documents, the index size will often be close to the data set size. In specific cases (a set of compressed mbox files for example), the index can become much bigger than the documents. It may also be much smaller if the documents contain a lot of images or other non-indexed data (an extreme example being a set of mp3 files where only the tags would be indexed).
Of course, images, sound and video do not increase the index size, which means that in most cases, the space used by the index will be negligible compared to the total amount of data on the computer.
The index data directory (xapiandb) only contains data that can be
        completely rebuilt by an index run (as long as the original
        documents exist), and it can always be destroyed
        safely.
Xapian versions usually support several formats for index storage. A given major Xapian version will have a current format, used to create new indexes, and will also support the format from the previous major version.
Xapian will not
          convert automatically an existing index from the older
          format to the newer one. If you want to upgrade to the
          new format, or if a very old index needs to be converted
          because its format is not supported any more, you will
          have to explicitly delete the old index (typically
          ~/.recoll/xapiandb), then
          run a normal indexing command. Using recollindex option
          -z would not work in this
          situation.
The Recoll index does not hold complete copies of the indexed documents (it almost does after version 1.24). But it does hold enough data to allow for an almost complete reconstruction. If confidential data is indexed, access to the database directory should be restricted.
Recoll will create the configuration directory with a mode of 0700 (access by owner only). As the index data directory is by default a sub-directory of the configuration directory, this should result in appropriate protection.
If you use another setup, you should think of the kind
          of protection you need for your index, set the directory
          and files access modes appropriately, and also maybe
          adjust the umask used during
          index updates.
This only needs concern you if your index is going to be bigger than around 5 GBytes. Beyond 10 GBytes, it becomes a serious issue. Most people have much smaller indexes. For reference, 5 GBytes would be around 2000 bibles, a lot of text. If you have a huge text dataset (remember: images don't count, the text content of PDFs is typically less than 5% of the file size), read on.
The amount of writing performed by Xapian during index creation is not linear with the index size (it is somewhere between linear and quadratic). For big indexes this becomes a performance issue, and may even be an SSD disk wear issue.
The problem can be mitigated by observing the following rules:
Partition the data set and create several indexes of reasonable size rather than a huge one. These indexes can then be queried in parallel (using the Recoll external indexes facility), or merged using xapian-compact.
Have a lot of RAM available and set the
                idxflushmb
                Recoll
                configuration parameter as high as you can without
                swapping (experimentation will be needed). 200
                would be a minimum in this context.
Use Xapian 1.4.10 or newer, as this version brought a significant improvement in the amount of writes.
Variables stored inside the Recoll configuration files control which areas of the file system are indexed, and how files are processed. The values can be set by editing the text files. Most of the more commonly used ones can also be adjusted by using the dialogs in the recoll GUI.
The first time you start recoll, you will be asked
        whether or not you would like it to build the index. If you
        want to adjust the configuration before indexing, just
        click Cancel at this point,
        which will get you into the configuration interface. If you
        exit at this point, recoll
        will have created a default configuration directory with
        empty configuration files, which you can then edit.
The configuration is documented inside the installation chapter of this document, or in the recoll.conf(5) manual page. Both documents are automatically generated from the comments inside the configuration file.
The most immediately useful variable is probably
        topdirs, which lists the subtrees and
        files to be indexed.
The applications needed to index file types other than text, HTML or email (ie: pdf, postscript, ms-word...) are described in the external packages section.
There are two incompatible types of Recoll indexes, depending on the treatment of character case and diacritics. A further section describes the two types in more detail. The default type is appropriate in most cases.
Multiple Recoll indexes can be created by using several configuration directories which are typically set to index different areas of the file system.
A specific index can be selected by setting the
          RECOLL_CONFDIR environment
          variable or giving the -c
          option to recoll and recollindex.
The recollindex program, used for creating or updating indexes, always works on a single index. The different configurations are entirely independent (no parameters are ever shared between configurations when indexing).
All the search interfaces (recoll, recollq, the Python API, etc.) operate with a main configuration, from which both configuration and index data are used, and can also query data from multiple additional indexes. Only the index data from the latter is used, their configuration parameters are ignored. This implies that some parameters should be consistent among index configurations which are to be used together.
When searching, the current main index (defined by
          RECOLL_CONFDIR or -c) is always active. If this is
          undesirable, you can set up your base configuration to
          index an empty directory.
Index configuration parameters can be set either by
          using a text editor on the files, or, for most
          parameters, by using the recoll index
          configuration GUI. In the latter case, the
          configuration directory for which parameters are modified
          is the one which was selected by RECOLL_CONFDIR or the -c parameter, and there is no way to
          switch configurations within the GUI.
See the configuration section for a detailed description of the parameters
Some configuration parameters must be consistent among a set of multiple indexes used together for searches. Most importantly, all indexes to be queried concurrently must have the same option concerning character case and diacritics stripping, but there are other constraints. Most of the relevant parameters affect the term generation.
Using multiple configurations implies a small level of command line or file manager usage. The user must explicitly create additional configuration directories, the GUI will not do it. This is to avoid mistakenly creating additional directories when an argument is mistyped. Also, the GUI or the indexer must be launched with a specific option or environment to work on the right configuration.
Initially creating the configuration and index:
mkdir /path/to/my/new/config
            Configuring the new index can be done from the
            recoll
            GUI, launched from the command line to pass the
            -c option (you could
            create a desktop file to do it for you), and then using
            the GUI
            index configuration tool to set up the index.
recoll -c /path/to/my/new/config
            Alternatively, you can just start a text editor on the main configuration file:
someEditor/path/to/my/new/config/recoll.conf
Creating and updating the index can be done from the command line:
recollindex -c /path/to/my/new/config
            or from the File menu of a GUI launched with the same option (recoll, see above).
The same GUI would also let you set up batch
            indexing for the new index. Real time indexing can only
            be set up from the GUI for the default index (the menu
            entry will be inactive if the GUI was started with a
            non-default -c
            option).
The new index can be queried alone with
recoll -c /path/to/my/new/config
            Or, in parallel with the default index, by starting
            recoll
            without a -c option, and
            using the  →
            
            menu.
As of Recoll version
          1.18 you have a choice of building an index with terms
          stripped of character case and diacritics, or one with
          raw terms. For a source term of Résumé, the former will store
          resume, the latter
          Résumé.
Each type of index allows performing searches insensitive to case and diacritics: with a raw index, the user entry will be expanded to match all case and diacritics variations present in the index. With a stripped index, the search term will be stripped before searching.
A raw index allows using case and diacritics to
          discriminate between terms, e.g., returning different
          results when searching for US and us
          or resume and résumé. Read the section
          about search case and diacritics sensitivity for more
          details.
The type of index to be created is controlled by the
          indexStripChars
          configuration variable which can only be changed by
          editing the configuration file. Any change implies an
          index reset (not automated by Recoll), and all indexes in a search
          must be set in the same way (again, not checked by
          Recoll).
Recoll creates a
          stripped index by default if indexStripChars is not set.
As a cost for added capability, a raw index will be slightly bigger than a stripped one (around 10%). Also, searches will be more complex, so probably slightly slower, and the feature is relatively little used, so that a certain amount of weirdness cannot be excluded.
One of the most adverse consequence of using a raw index is that some phrase and proximity searches may become impossible: because each term needs to be expanded, and all combinations searched for, the multiplicative expansion may become unmanageable.
The Recoll indexing process recollindex can use multiple threads to speed up indexing on multiprocessor systems. The work done to index files is divided in several stages and some of the stages can be executed by multiple threads. The stages are:
File system walking: this is always performed by the main thread.
File conversion and data extraction.
Text processing (splitting, stemming, etc.).
Xapian index update.
You can also read a longer document about the transformation of Recoll indexing to multithreading.
The threads configuration is controlled by two configuration file parameters.
thrQSizesThis variable defines the job input queues configuration. There are three possible queues for stages 2, 3 and 4, and this parameter should give the queue depth for each stage (three integer values). If a value of -1 is used for a given stage, no queue is used, and the thread will go on performing the next stage. In practise, deep queues have not been shown to increase performance. A value of 0 for the first queue tells Recoll to perform autoconfiguration (no need for anything else in this case, thrTCounts is not used) - this is the default configuration.
thrTCountsThis defines the number of threads used for each stage. If a value of -1 is used for one of the queue depths, the corresponding thread count is ignored. It makes no sense to use a value other than 1 for the last stage because updating the Xapian index is necessarily single-threaded (and protected by a mutex).
If the first value in thrQSizes is 0, thrTCounts is ignored.
The following example would use three queues (of depth 2), and 4 threads for converting source documents, 2 for processing their text, and one to update the index. This was tested to be the best configuration on the test system (quadri-processor with multiple disks).
          thrQSizes = 2 2 2
          thrTCounts =  4 2 1
        
          The following example would use a single queue, and the complete processing for each document would be performed by a single thread (several documents will still be processed in parallel in most cases). The threads will use mutual exclusion when entering the index update stage. In practise the performance would be close to the precedent case in general, but worse in certain cases (e.g. a Zip archive would be performed purely sequentially), so the previous approach is preferred. YMMV... The 2 last values for thrTCounts are ignored.
          thrQSizes = 2 -1 -1
          thrTCounts =  6 1 1
        
          The following example would disable multithreading. Indexing will be performed by a single thread.
          thrQSizes = -1 -1 -1
        
        Most parameters for a given index configuration can be
          set from a recoll GUI running on
          this configuration (either as default, or by setting
          RECOLL_CONFDIR or the
          -c option.)
The interface is started from the → menu entry. It is divided in four tabs, Global parameters, Local parameters, Web history (which is explained in the next section) and Search parameters.
The Global parameters tab allows setting global variables, like the lists of top directories, skipped paths, or stemming languages.
The Local parameters tab allows setting variables that can be redefined for subdirectories. This second tab has an initially empty list of customisation directories, to which you can add. The variables are then set for the currently selected directory (or at the top level if the empty line is selected).
The Search parameters section defines parameters which are used at query time, but are global to an index and affect all search tools, not only the GUI.
The meaning for most entries in the interface is
          self-evident and documented by a ToolTip popup on the text label. For
          more detail, you will need to refer to the configuration
          section of this guide.
The configuration tool normally respects the comments and most of the formatting inside the configuration file, so that it is quite possible to use it on hand-edited files, which you might nevertheless want to backup first...
Recoll used to have no support for indexing removable volumes (portable disks, USB keys, etc.). Recent versions have improved the situation and support indexing removable volumes in two different ways:
By indexing the volume in the main, fixed, index, and ensuring that the volume data is not purged if the indexing runs while the volume is mounted. (since Recoll 1.25.2).
By storing a volume index on the volume itself (since Recoll 1.24).
As of version 1.25.2, Recoll provides a simple way to ensure that the index data for an absent volume will not be purged. Two conditions must be met:
The volume mount point must be a member of the
                topdirs list.
The mount directory must be empty (when the volume is not mounted).
If recollindex finds that
          one of the topdirs is empty
          when starting up, any existing data for the tree will be
          preserved by the indexing pass (no purge for this
          area).
As of Recoll 1.24, it has become possible to build self-contained datasets including a Recoll configuration directory and index together with the indexed documents, and to move such a dataset around (for example copying it to an USB drive), without having to adjust the configuration for querying the index.
This is a query-time feature only. The index must only be updated in its original location. If an update is necessary in a different location, the index must be reset.
The principle of operation is that the configuration stores the location of the original configuration directory, which must reside on the movable volume. If the volume is later mounted elsewhere, Recoll adjusts the paths stored inside the index by the difference between the original and current locations of the configuration directory.
To make a long story short, here follows a script to create a Recoll configuration and index under a given directory (given as single parameter). The resulting data set (files + recoll directory) can later to be moved to a CDROM or thumb drive. Longer explanations come after the script.
#!/bin/sh
fatal()
{
    echo $*;exit 1
}
usage()
{
    fatal "Usage: init-recoll-volume.sh <top-directory>"
}
test $# = 1 || usage
topdir=$1
test -d "$topdir" || fatal $topdir should be a directory
confdir="$topdir/recoll-config"
test ! -d "$confdir" || fatal $confdir should not exist
mkdir "$confdir"
cd "$topdir"
topdir=`pwd`
cd "$confdir"
confdir=`pwd`
(echo topdirs = '"'$topdir'"'; \
 echo orgidxconfdir = $topdir/recoll-config) > "$confdir/recoll.conf"
recollindex -c "$confdir"
          The examples below will assume that you have a dataset
          under /home/me/mydata/,
          with the index configuration and data stored inside
          /home/me/mydata/recoll-confdir.
In order to be able to run queries after the dataset has been moved, you must ensure the following:
The main configuration file must define the
                orgidxconfdir
                variable to be the original location of the
                configuration directory (orgidxconfdir=/home/me/mydata/recoll-confdir
                must be set inside /home/me/mydata/recoll-confdir/recoll.conf
                in the example above).
The configuration directory must exist with the
                documents, somewhere under the directory which will
                be moved. E.g. if you are moving /home/me/mydata around, the
                configuration directory must exist somewhere below
                this point, for example /home/me/mydata/recoll-confdir,
                or /home/me/mydata/sub/recoll-confdir.
You should keep the default locations for the
                index elements which are relative to the
                configuration directory by default (principally
                dbdir). Only the paths
                referring to the documents themselves (e.g.
                topdirs values) should
                be absolute (in general, they are only used when
                indexing anyway).
Only the first point needs an explicit user action, the Recoll defaults are compatible with the third one, and the second is natural.
If, after the move, the configuration directory needs
          to be copied out of the dataset (for example because the
          thumb drive is too slow), you can set the curidxconfdir,
          variable inside the copied configuration to define the
          location of the moved one. For example if /home/me/mydata is now mounted onto
          /media/me/somelabel, but
          the configuration directory and index has been copied to
          /tmp/tempconfig, you would
          set curidxconfdir to
          /media/me/somelabel/recoll-confdir
          inside /tmp/tempconfig/recoll.conf.
          orgidxconfdir would still be
          /home/me/mydata/recoll-confdir in the
          original and the copy.
If you are regularly copying the configuration out of
          the dataset, it will be useful to write a script to
          automate the procedure. This can't really be done inside
          Recoll because there are
          probably many possible variants. One example would be to
          copy the configuration to make it writable, but keep the
          index data on the medium because it is too big - in this
          case, the script would also need to set dbdir in the copied configuration.
The same set of modifications (Recoll 1.24) has also made it possible to run queries from a readonly configuration directory (with slightly reduced function of course, such as not recording the query history).
With the help of a Firefox extension, Recoll can index the Internet pages that you visit. The extension has a long history: it was initially designed for the Beagle indexer, then adapted to Recoll and the Firefox XUL API. The current version of the extension is located in the Mozilla add-ons repository uses the WebExtensions API, and works with current Firefox versions.
The extension works by copying visited Web pages to an indexing queue directory, which Recoll then processes, storing the data into a local cache, then indexing it, then removing the file from the queue.
As mentioned above, a copy of the indexed Web pages is
          retained by Recoll in a local cache (from which data is
          fetched for previews, or when resetting the index). The
          cache is not changed by an index reset, just read for
          indexing. The cache has a maximum size, which can be
          adjusted from the Index
          configuration / Web
          history panel (webcachemaxmbs parameter in recoll.conf). Once the maximum size is
          reached, old pages are erased to make room for new ones.
          The pages which you want to keep indefinitely need to be
          explicitly archived elsewhere. Using a very high value
          for the cache size can avoid data erasure, but see the
          above 'Howto' page for more details and gotchas.
The visited Web pages indexing feature can be enabled on
        the Recoll side from the
        GUI Index configuration
        panel, or by editing the configuration file (set
        processwebqueue to 1).
The Recoll GUI has a tool to list and edit the contents of the Web cache. ( → )
The recollindex command has two options to help manage the Web cache:
--webcache-compact will recover the
            space from erased entries. It may need to use twice the
            disk space currently needed for the Web cache.--webcache-burst destdir will
            extract all current entries into pairs of metadata and
            data files created inside destdirYou can find more details on Web indexing, its usage and configuration in a Recoll 'Howto' entry.
User extended attributes are named pieces of information that most modern file systems can attach to any file.
Recoll processes all
        extended attributes as document fields. Note that most
        fields are not indexed by default, you need to activate
        them by defining a prefix in the fields configuration file.
A freedesktop standard defines a few special attributes, which are handled as such by Recoll:
If set, this overrides any other determination of the file MIME type.
If set, this defines the file character set (mostly useful for plain text files).
By default, other attributes are handled as Recoll fields of the same name.
On Linux, the user prefix
        is removed from the name.
The name translation can be configured more precisely,
        also inside the fields configuration file.
During indexing, it is possible to import metadata for each file by executing commands. This allows, for example, extracting tag data from an external application and storing it in a field for indexing.
See the section about
        the metadatacmds field in
        the main configuration chapter for a description of the
        configuration syntax.
For example, if you would want Recoll to use tags managed by
        tmsu in a field named
        tags, you would
        add the following to the configuration file:
[/some/area/of/the/fs]
metadatacmds = ; tags = tmsu tags %f
      
        Depending on the tmsu
          version, you may need/want to add options like
          --database=/some/db.
You may want to restrict this processing to a subset of
        the directory tree, because it may slow down indexing a bit
        ([some/area/of/the/fs]).
Note the initial semi-colon after the equal sign.
In the example above, the output of tmsu is used to set a
        field named tags.
        The field name is arbitrary and could be tmsu or myfield just the same, but
        tags is an alias
        for the standard Recoll
        keywords field, and the
        tmsu output
        will just augment its contents. This will avoid the need to
        extend the field
        configuration.
Once re-indexing is performed (you will need to force
        the file reindexing, Recoll will not detect the need by
        itself), you will be able to search from the query
        language, through any of its aliases: tags:some/alternate/values
        or tags:all,these,values. The
        compact comma- or slash-based field search syntax is
        supported for recoll 1.20 and later. For older versions,
        you would need to repeat the tags: specifier for each
        term, e.g. tags:some OR tags:alternate.
Tags changes will not be detected by the indexer if the
        file itself did not change. One possible workaround would
        be to update the file ctime
        when you modify the tags, which would be consistent with
        how extended attributes function. A pair of chmod commands could
        accomplish this, or a touch
        -a. Alternatively, just couple the tag update with a
        recollindex -e -i /path/to/the/file.
The PDF format is very important for scientific and technical documentation, and document archival. It has extensive facilities for storing metadata along with the document, and these facilities are actually used in the real world.
In consequence, the rclpdf.py PDF input handler has more complex capabilities than most others, and it is also more configurable. Specifically, rclpdf.py has the following features:
It can be configured to extract specific metadata tags from an XMP packet.
It can extract PDF attachments.
It can automatically perform OCR if the document text is empty. This is done by executing an external program and is now described in a separate section, because the OCR framework can also be used with non-PDF image files.
The rclpdf.py script in
          Recoll version 1.23.2
          and later can extract XMP metadata fields by executing
          the pdfinfo
          command (usually found with poppler-utils). This is controlled
          by the pdfextrameta
          configuration variable, which specifies which tags to
          extract and, possibly, how to rename them.
The pdfextrametafix variable can be used to designate a file with Python code to edit the metadata fields (available for Recoll 1.23.3 and later. 1.23.2 has equivalent code inside the handler script). Example:
import sys
        import re
        class MetaFixer(object):
            def __init__(self):
                pass
            def metafix(self, nm, txt):
                if nm == 'bibtex:pages':
                    txt = re.sub(r'--', '-', txt)
                elif nm == 'someothername':
                    # do something else
                    pass
                elif nm == 'stillanother':
                    # etc.
                    pass
        
                return txt
            def wrapup(self, metaheaders):
                pass
        
          If the 'metafix()' method is defined, it is called for each metadata field. A new MetaFixer object is created for each PDF document (so the object can keep state for, for example, eliminating duplicate values). If the 'wrapup()' method is defined, it is called at the end of XMP fields processing with the whole metadata as parameter, as an array of '(nm, val)' pairs, allowing an alternate approach for editing or adding/deleting fields.
If pdftk is installed, and if the the pdfattach configuration variable is set, the PDF input handler will try to extract PDF attachments for indexing as sub-documents of the PDF file. This is disabled by default, because it slows down PDF indexing a bit even if not one attachment is ever found (PDF attachments are uncommon in my experience).
This is new in Recoll 1.26.5. Older versions had a more limited, non-caching capability to execute an external OCR program in the PDF handler. The new function has the following features:
The OCR output is cached, stored as separate files. The caching is ultimately based on a hash value of the original file contents, so that it is immune to file renames. A first path-based layer ensures fast operation for unchanged (unmoved files), and the data hash (which is still orders of magnitude faster than OCR) is only re-computed if the file has moved. OCR is only performed if the file was not previously processed or if it changed.
The support for a specific program is implemented in a simple Python module. It should be straightforward to add support for any OCR engine with a capability to run from the command line.
Modules initially exist for tesseract (Linux and Windows), and ABBYY FineReader (Linux, tested with version 11). ABBYY FineReader is a commercial closed source program, but it sometimes perform better than tesseract.
The OCR is currently only called from the PDF handler, but there should be no problem using it for other image types.
To enable this feature, you need to install one of the supported OCR applications (tesseract or ABBYY), enable OCR in the PDF handler, and tell Recoll where the appropriate command resides. The last parts are done by setting configuration variables. See the relevant section. All parameters can be localized in subdirectories through the usual main configuration mechanism (path sections).
The recollindex program
          performs index updates. You can start it either from the
          command line or from the  menu in the recoll GUI program.
          When started from the GUI, the indexing will run on the
          same configuration recoll was started on.
          When started from the command line, recollindex will use
          the RECOLL_CONFDIR variable or
          accept a -c confdir option to specify
          a non-default configuration directory.
If the recoll program finds no index when it starts, it will automatically start indexing (except if canceled).
The GUI menu has entries to start or stop the current indexing operation. When indexing is not currently running, you have a choice between or . The first choice only processes changed files, the second one erases the index before starting so that all files are processed.
On Linux and Windows, the GUI can be used to manage the indexing operation. Stopping the indexer can be done from the recoll GUI → menu entry.
On Linux, the recollindex indexing process can be interrupted by sending an interrupt (Ctrl-C, SIGINT) or terminate (SIGTERM) signal.
When stopped, some time may elapse before recollindex exits, because it needs to properly flush and close the index.
After an interruption, the index will be somewhat inconsistent because some operations which are normally performed at the end of the indexing pass will have been skipped (for example, the stemming and spelling databases will be inexistent or out of date). You just need to restart indexing at a later time to restore consistency. The indexing will restart at the interruption point (the full file tree will be traversed, but files that were indexed up to the interruption and for which the index is still up to date will not need to be reindexed).
recollindex has many options which are listed in its manual page. Only a few will be described here.
Option -z will reset the
          index when starting. This is almost the same as
          destroying the index files (the nuance is that the
          Xapian format version
          will not be changed).
Option -Z will force the
          update of all documents without resetting the index
          first. This will not have the "clean start" aspect of
          -z, but the advantage is that
          the index will remain available for querying while it is
          rebuilt, which can be a significant advantage if it is
          very big (some installations need days for a full index
          rebuild).
Option -k will force
          retrying files which previously failed to be indexed, for
          example because of a missing helper program.
Of special interest also, maybe, are the -i and -f
          options. -i allows indexing
          an explicit list of files (given as command line
          parameters or read on stdin). -f
          tells recollindex to ignore
          file selection parameters from the configuration.
          Together, these options allow building a custom file
          selection process for some area of the file system, by
          adding the top directory to the skippedPaths list and using an
          appropriate file selection method to build the file list
          to be fed to recollindex
          -if. Trivial example:
          find . -name indexable.txt -print | recollindex -if
        
          recollindex
          -i will not descend into
          subdirectories specified as parameters, but just add them
          as index entries. It is up to the external file selection
          method to build the complete file list.
The most common way to set up indexing is to have a
          cron task execute it every night. For example the
          following crontab entry
          would do it every day at 3:30AM (supposing recollindex is in your
          PATH):
        30 3 * * * recollindex > /some/tmp/dir/recolltrace 2>&1
        
          Or, using anacron:
        1  15  su mylogin -c "recollindex recollindex > /tmp/rcltraceme 2>&1"
        
          The Recoll GUI has
          dialogs to manage crontab
          entries for recollindex. You can
          reach them from the  →  menu. They only
          work with the good old cron, and do not give
          access to all features of cron scheduling.
          Entries created via the tool are marked with a
          RCLCRON_RCLINDEX= marker so
          that the tool knows which entries belong to it. As a side
          effect, this sets an environment variable for the
          process, but it's not actually used, this is just a
          marker.
The usual command to edit your crontab is crontab -e (which will usually start the
          vi editor
          to edit the file). You may have more sophisticated tools
          available on your system.
Please be aware that there may be differences between your usual interactive command line environment and the one seen by crontab commands. Especially the PATH variable may be of concern. Please check the crontab manual pages about possible issues.
Real time monitoring/indexing is performed by starting
        the recollindex -m command. With this option, recollindex will detach
        from the terminal and become a daemon, permanently
        monitoring file changes and updating the index.
In this situation, the recoll GUI menu makes two operations available: and .
has the same effect as restarting the indexer, and will cause a complete walk of the indexed area, processing the changed files, then switch to monitoring. This is only marginally useful, maybe in cases where the indexer is configured to delay updates, or to force an immediate rebuild of the stemming and phonetic data, which are only processed at intervals by the real time indexer.
While it is convenient that data is indexed in real time, repeated indexing can generate a significant load on the system when files such as email folders change. Also, monitoring large file trees by itself significantly taxes system resources. You probably do not want to enable it if your system is short on resources. Periodic indexing is adequate in most cases.
As of Recoll 1.24, you can set the monitordirs configuration variable to specify that only a subset of your indexed files will be monitored for instant indexing. In this situation, an incremental pass on the full tree can be triggered by either restarting the indexer, or just running recollindex, which will notify the running process. The recoll GUI also has a menu entry for this.
The installation contains two example files (in
          share/recoll/examples) for
          starting the indexing daemon with systemd.
recollindex.service
          would be used for starting recollindex as a user
          service. The indexer will start when the user logs in and
          run while there is a session open for them.
recollindex@.service is
          a template service which would be used for starting the
          indexer at boot time, running as a specific user. It can
          be useful when running the text search as a shared
          service (e.g. when users access it through the WEB
          UI).
If configured to do so, the unit files should have
          been installed in your system's default systemd paths
          (usually /usr/lib/systemd/system/ and
          /usr/lib/systemd/user/). If
          not, you may need to copy the files there before starting
          the service.
With the unit files installed in the proper location, the user unit can be started with the following commands:
systemctl --user daemon-reload systemctl --user enable --now recollindex.service
The system unit file can be enabled for a particular user by running, as root:
systemctl daemon-reload
systemctl enable --now recollindex@username.service
          (A valid user name should be substituted for
          username, of course.)
Under KDE,
          Gnome and some other
          desktop environments, the daemon can automatically
          started when you log in, by creating a desktop file
          inside the ~/.config/autostart directory. This can
          be done for you by the Recoll GUI. Use the 
          menu.
With older X11 setups, starting the daemon is normally performed as part of the user session script.
The rclmon.sh script can
          be used to easily start and stop the daemon. It can be
          found in the examples
          directory (typically /usr/local/[share/]recoll/examples).
For example, a good old xdm-based session could have a
          .xsession script with the
          following lines at the end:
recollconf=$HOME/.recoll-home recolldata=/usr/local/share/recoll RECOLL_CONFDIR=$recollconf $recolldata/examples/rclmon.sh start fvwm
The indexing daemon gets started, then the window manager, for which the session waits.
By default the indexing daemon will monitor the state
          of the X11 session, and exit when it finishes, it is not
          necessary to kill it explicitly. (The X11 server monitoring can be
          disabled with option -x to
          recollindex).
If you use the daemon completely out of an
          X11 session, you need to
          add option -x to disable
          X11 session monitoring
          (else the daemon will not start).
By default, the messages from the indexing daemon will
          be sent to the same file as those from the interactive
          commands (logfilename). You
          may want to change this by setting the daemlogfilename and daemloglevel configuration parameters.
          Also the log file will only be truncated when the daemon
          starts. If the daemon runs permanently, the log file may
          grow quite big, depending on the log level.
Increasing resources for inotify. On Linux
          systems, monitoring a big tree may need increasing the
          resources available to inotify, which are normally
          defined in /etc/sysctl.conf.
### inotify
#
# cat  /proc/sys/fs/inotify/max_queued_events   - 16384
# cat  /proc/sys/fs/inotify/max_user_instances  - 128
# cat  /proc/sys/fs/inotify/max_user_watches    - 16384
#
# -- Change to:
#
fs.inotify.max_queued_events=32768
fs.inotify.max_user_instances=256
fs.inotify.max_user_watches=32768
        
          Especially, you will need to trim your tree or adjust
          the max_user_watches value
          if indexing exits with a message about errno ENOSPC (28) from inotify_add_watch.
Slowing down the reindexing rate for fast changing
          files. When using the real time monitor, it may
          happen that some files need to be indexed, but change so
          often that they impose an excessive load for the system.
          Recoll provides a
          configuration option to specify the minimum time before
          which a file, specified by a wildcard pattern, cannot be
          reindexed. See the mondelaypatterns parameter in the
          configuration section.
Getting answers to specific queries is of course the whole point of Recoll. The multiple provided interfaces always understand simple queries made of one or several words, and return appropriate results in most cases.
In order to make the most of Recoll though, it may be worthwhile to understand how it processes your input. Five different modes exist:
In All Terms mode,
              Recoll looks for
              documents containing all your input terms.
The Query Language
              mode behaves like All
              Terms in the absence of special input, but it
              can also do much more. This is the best mode for
              getting the most of Recoll. It is usable from all
              possible interfaces (GUI, command line, WEB UI, ...),
              and is described
              here.
In Any Term mode,
              Recoll looks for
              documents containing any your input terms, preferring
              those which contain more.
In File Name mode,
              Recoll will only
              match file names, not content. Using a small subset
              of the index allows things like left-hand wildcards
              without performance issues, and may sometimes be
              useful.
The GUI Advanced
              Search mode is actually not more powerful than
              the query language, but it helps you build complex
              queries without having to remember the language, and
              avoids any interpretation ambiguity, as it bypasses
              the user input parser.
These five input modes are supported by the different user interfaces which are described in the following sections.
The recoll program provides the main user interface for searching. It is based on the Qt library.
recoll has two search interfaces:
Simple search (the default, on the main screen) has a single entry field where you can enter multiple words.
Advanced search (a panel accessed through the Tools menu or the toolbox bar icon) has multiple entry fields, which you may use to build a logical condition, with additional filtering on file type, location in the file system, modification date, and size.
In most cases, you can enter the terms as you think them, even if they contain embedded punctuation or other non-textual characters (e.g. Recoll can handle things like email addresses).
The main case where you should enter text differently from how it is printed is for east-asian languages (Chinese, Japanese, Korean). Words composed of single or multiple characters should be entered separated by white space in this case (they would typically be printed without white space).
Some searches can be quite complex, and you may want to re-use them later, perhaps with some tweaking. Recoll can save and restore searches. See Saving and restoring queries.
Start the recoll program.
Possibly choose a search mode: Any term, All terms, File name or Query language.
Enter search term(s) in the text field at the top of the window.
Click the Search button or hit the Enter key to start the search.
The initial default search mode is Query language. Without special directives, this will look for documents containing all of the search terms (the ones with more terms will get better scores), just like the All terms mode. Any term will search for documents where at least one of the terms appear. File name will exclusively look for file names, not contents
All search modes allow terms to be expanded with
          wildcards characters (*,
          ?, []). See the section about wildcards for
          more details.
In all modes except File
          name, you can search for exact phrases (adjacent
          words in a given order) by enclosing the input inside
          double quotes. Ex: "virtual
          reality".
The Query Language features are described in a separate section.
When using a stripped index (the default), character
          case has no influence on search, except that you can
          disable stem expansion for any term by capitalizing it.
          Ie: a search for floor will
          also normally look for flooring, floored, etc., but a search for
          Floor will only look for
          floor, in any character
          case. Stemming can also be disabled globally in the
          preferences. When using a raw index, the
          rules are a bit more complicated.
Recoll remembers the last few searches that you performed. You can directly access the search history by clicking the clock button on the right of the search entry, while the latter is empty. Otherwise, the history is used for entry completion (see next). Only the search texts are remembered, not the mode (all/any/file name).
While text is entered in the search area, recoll will display possible completions, filtered from the history and the index search terms. This can be disabled with a GUI Preferences option.
Double-clicking on a word in the result list or a preview window will insert it into the simple search entry field.
You can cut and paste any text into an All terms or Any
          term search field, punctuation, newlines and all -
          except for wildcard characters (single ? characters are ok). Recoll will process it and produce a
          meaningful search. This is what most differentiates this
          mode from the Query
          Language mode, where you have to care about the
          syntax.
You can use the → dialog for more complex searches.
The File name search mode will specifically look for file names. The point of having a separate file name search is that wildcard expansion can be performed more efficiently on a small subset of the index (allowing wildcards on the left of terms without excessive cost). Things to know:
White space in the entry should match white space in the file name, and is not treated specially.
The search is insensitive to character case and accents, independently of the type of index.
An entry without any wildcard character and not
                capitalized will be prepended and appended with '*'
                (ie: etc
                -> *etc*, but
                Etc ->
                etc).
If you have a big index (many files), excessively generic fragments may result in inefficient searches.
After starting a search, a list of results will instantly be displayed in the main window.
By default, the document list is presented in order of relevance (how well the system estimates that the document matches the query). You can sort the result by ascending or descending date by using the vertical arrows in the toolbar.
Clicking the Preview link
          for an entry will open an internal preview window for the
          document. Further Preview
          clicks for the same search will open tabs in the existing
          preview window. You can use Shift+Click to force the
          creation of another preview window, which may be useful
          to view the documents side by side. (You can also browse
          successive results in a single preview window by typing
          Shift+ArrowUp/Down in the
          window).
Clicking the Open link
          will start an external viewer for the document. By
          default, Recoll lets the
          desktop choose the appropriate application for most
          document types. See further for
          customizing the applications.
You can click on the Query
          details link at the top of the results page to see
          the query actually performed, after stem expansion and
          other processing.
Double-clicking on any word inside the result list or a preview window will insert it into the simple search text.
The result list is divided into pages (the size of which you can change in the preferences). Use the arrow buttons in the toolbar or the links at the bottom of the page to browse the results.
The Preview and
          Open edit links may not be
          present for all entries, meaning that Recoll has no configured way to
          preview a given file type (which was indexed by name
          only), or no configured external editor for the file
          type. This can sometimes be adjusted simply by tweaking
          the mimemap and mimeview configuration files (the
          latter can be modified with the user preferences
          dialog).
The format of the result list entries is entirely configurable by using the preference dialog to edit an HTML fragment.
By default Recoll lets the desktop choose what application should be used to open a given document, with exceptions.
The details of this behaviour can be customized with
            the  →
             →
             →
             dialog or by editing the mimeview configuration file.
When Use desktop preferences, at the top of the dialog, is checked, the desktop default is generally used, but there is a small default list of exceptions, for MIME types where the Recoll choice should override the desktop one. These are applications which are well integrated with Recoll, for example, on Linux, evince for viewing PDF and Postscript files because of its support for opening the document at a specific page and passing a search string as an argument. You can add or remove document types to the exceptions by using the dialog.
If you prefer to completely customize the choice of applications, you can uncheck Use desktop preferences, in which case the Recoll predefined applications will be used, and can be changed for each document type. This is probably not the most convenient approach in most cases.
In all cases, the applications choice dialog accepts
            multiple selections of MIME types in the top section,
            and lets you define how they are processed in the
            bottom one. In most cases, you will be using
            %f as a place holder to be
            replaced by the file name in the application command
            line.
You may also change the choice of applications by
            editing the mimeview configuration file if
            you find this more convenient.
Under Unix-like systems, each result list entry also has a right-click menu with an Open With entry. This lets you choose an application from the list of those which registered with the desktop for the document MIME type, on a case by case basis.
When a search yields no result, and if the aspell dictionary is configured, Recoll will try to check for misspellings among the query terms, and will propose lists of replacements. Clicking on one of the suggestions will replace the word and restart the search. You can hold any of the modifier keys (Ctrl, Shift, etc.) while clicking if you would rather stay on the suggestion screen because several terms need replacement.
Apart from the preview and edit links, you can display a pop-up menu by right-clicking over a paragraph in the result list. This menu has the following entries:
Preview
Open
Open With
Run Script
Copy File Name
Copy Url
Save to File
Find similar
Preview Parent document
Open Parent document
Open Snippets Window
The Preview and Open entries do the same thing as the corresponding links.
Open With
            (Unix-like systems)
            lets you open the document with one of the applications
            claiming to be able to handle its MIME type (the
            information comes from the .desktop files in /usr/share/applications).
Run Script (Unix-like systems) allows starting an arbitrary command on the result file. It will only appear for results which are top-level files. See further for a more detailed description.
The Copy File Name and Copy Url copy the relevant data to the clipboard, for later pasting.
Save to File allows saving the contents of a result document to a chosen file. This entry will only appear if the document does not correspond to an existing file, but is a subdocument inside such a file (ie: an email attachment). It is especially useful to extract attachments with no associated editor.
The Open/Preview Parent document entries allow working with the higher level document (e.g. the email message an attachment comes from). Recoll is sometimes not totally accurate as to what it can or can't do in this area. For example the Parent entry will also appear for an email which is part of an mbox folder file, but you can't actually visualize the mbox (there will be an error dialog if you try).
If the document is a top-level file, Open Parent will start the default file manager on the enclosing filesystem directory.
The Find similar entry will select a number of relevant term from the current document and enter them into the simple search field. You can then start a simple search, with a good chance of finding documents related to the current result. I can't remember a single instance where this function was actually useful to me...
The Open Snippets Window entry will only appear for documents which support page breaks (typically PDF, Postscript, DVI). The snippets window lists extracts from the document, taken around search terms occurrences, along with the corresponding page number, as links which can be used to start the native viewer on the appropriate page. If the viewer supports it, its search function will also be primed with one of the search terms.
As an alternative to the result list, the results can also be displayed in spreadsheet-like fashion. You can switch to this presentation by clicking the table-like icon in the toolbar (this is a toggle, click again to restore the list).
Clicking on the column headers will allow sorting by the values in the column. You can click again to invert the order, and use the header right-click menu to reset sorting to the default relevance order (you can also use the sort-by-date arrows to do this).
Both the list and the table display the same underlying results. The sort order set from the table is still active if you switch back to the list mode. You can click twice on a date sort arrow to reset it from there.
The header right-click menu allows adding or deleting columns. The columns can be resized, and their order can be changed (by dragging). All the changes are recorded when you quit recoll
Hovering over a table row will update the detail area at the bottom of the window with the corresponding values. You can click the row to freeze the display. The bottom area is equivalent to a result list paragraph, with links for starting a preview or a native application, and an equivalent right-click menu. Typing Esc (the Escape key) will unfreeze the display.
Apart from the Open and Open With operations, which allow starting an application on a result document (or a temporary copy), based on its MIME type, it is also possible to run arbitrary commands on results which are top-level files, using the Run Script entry in the results pop-up menu.
The commands which will appear in the Run Script submenu must be defined by
          .desktop files inside the
          scripts subdirectory of the
          current configuration directory.
Here follows an example of a .desktop file, which could be named for
          example, ~/.recoll/scripts/myscript.desktop (the
          exact file name inside the directory is irrelevant):
          [Desktop Entry]
          Type=Application
          Name=MyFirstScript
          Exec=/home/me/bin/tryscript %F
          MimeType=*/*
        
          The Name attribute
          defines the label which will appear inside the
          Run Script menu. The
          Exec attribute defines the
          program to be run, which does not need to actually be a
          script, of course. The MimeType attribute is not used, but
          needs to exist.
The commands defined this way can also be used from links inside the result paragraph.
As an example, it might make sense to write a script which would move the document to the trash and purge it from the Recoll index.
The default format for the result list entries and the detail area of the result table display an icon for each result document. The icon is either a generic one determined from the MIME type, or a thumbnail of the document appearance. Thumbnails are only displayed if found in the standard freedesktop location, where they would typically have been created by a file manager.
Recoll has no capability to create thumbnails. A relatively simple trick is to use the Open parent document/folder entry in the result list popup menu. This should open a file manager window on the containing directory, which should in turn create the thumbnails (depending on your settings). Restarting the search should then display the thumbnails.
There are also some pointers about thumbnail generation in the Recoll FAQ.
The preview window opens when you first click a
          Preview link inside the
          result list.
Subsequent preview requests for a given search open new tabs in the existing window (except if you hold the Shift key while clicking which will open a new window for side by side viewing).
Starting another search and requesting a preview will create a new preview window. The old one stays open until you close it.
You can close a preview tab by typing Ctrl-W (Ctrl + W) in the window. Closing the last tab, or using the window manager button in the top of the frame will also close the window.
You can display successive or previous documents from the result list inside a preview tab by typing Shift+Down or Shift+Up (Down and Up are the arrow keys).
A right-click menu in the text area allows switching between displaying the main text or the contents of fields associated to the document (ie: author, abtract, etc.). This is especially useful in cases where the term match did not occur in the main text but in one of the fields. In the case of images, you can switch between three displays: the image itself, the image metadata as extracted by exiftool and the fields, which is the metadata stored in the index.
You can print the current preview window contents by typing Ctrl-P (Ctrl + P) in the window text.
The preview window has an internal search capability, mostly controlled by the panel at the bottom of the window, which works in two modes: as a classical editor incremental search, where we look for the text entered in the entry zone, or as a way to walk the matches between the document and the Recoll query that found it.
The preview tabs have an internal incremental search function. You initiate the search either by typing a / (slash) or CTL-F inside the text area or by clicking into the Search for: text field and entering the search string. You can then use the Next and Previous buttons to find the next/previous occurrence. You can also type F3 inside the text area to get to the next occurrence.
If you have a search string entered and you use Ctrl-Up/Ctrl-Down to browse the results, the search is initiated for each successive document. If the string is found, the cursor will be positioned at the first occurrence of the search string.
If the entry area is empty when you click the Next or Previous buttons, the editor will be scrolled to show the next match to any search term (the next highlighted zone). If you select a search group from the dropdown list and click Next or Previous, the match list for this group will be walked. This is not the same as a text search, because the occurrences will include non-exact matches (as caused by stemming or wildcards). The search will revert to the text mode as soon as you edit the entry area.
Selecting the → menu entry will open a window with radio- and check-buttons which can be used to filter the current query with user-defined query language fragments. This can be useful if you have frequent reusable selectors, not covered by the standard category selectors, for example, filtering on alternate directories, or searching just one category of files. In practise, the query fragments are joined to the current query as an AND clause.
The contents of the window are entirely customizable,
          and defined by the contents of a XML text file, named
          fragment-buttons.xml and
          which will be looked for in the current index
          configuration directory. The sample file distributed with
          Recoll contains a number
          of example filters. This will be automatically copied to
          the configuration directory if the file does not exist in
          there (e.g. ~/.recoll/fragment-buttons.xml under
          Linux and Mac OS, $HOME/AppData/Local/Recoll for
          Windows). Editing the copy will allow you to configure
          the tool for your needs .
The fragment-buttons.xml file was named
            fragbuts.xml up to
            Recoll version 1.31.0.
            This was deemed too close to offensive for native
            English speakers, so that the file was renamed. An
            existing fragbuts.xml
            will still be used if fragment-buttons.xml does not exist.
            No automatic renaming will be performed.
Here follows an example:
<?xml version="1.0" encoding="UTF-8"?>
<fragbuttons version="1.0">
  <radiobuttons>
    <!-- Actually useful: toggle Web queue results inclusion -->
    <fragbutton>
      <label>Include Web Results</label>
      <frag></frag>
    </fragbutton>
    <fragbutton>
      <label>Exclude Web Results</label>
      <frag>-rclbes:BGL</frag>
    </fragbutton>
    <fragbutton>
      <label>Only Web Results</label>
      <frag>rclbes:BGL</frag>
    </fragbutton>
  </radiobuttons>
  <buttons>
    <fragbutton>
      <label>Example: Year 2010</label>
      <frag>date:2010-01-01/2010-12-31</frag>
    </fragbutton>
    <fragbutton>
      <label>Example: c++ files</label>
      <frag>ext:cpp OR ext:cxx</frag>
    </fragbutton>
    <fragbutton>
      <label>Example: My Great Directory</label>
      <frag>dir:/my/great/directory</frag>
    </fragbutton>
  </buttons>
</fragbuttons>
        
          Each radiobuttons or
          buttons section defines a
          line of checkbuttons or radiobuttons inside the window.
          Any number of buttons can be
          selected, but the radiobuttons in a line are
          exclusive.
Each fragbutton section
          defines the label for a button, and the Query Language
          fragment which will be added (as an AND filter) before
          performing the query if the button is active.
The only thing that you need to know about XML for
          editing this file is that any opening tag like <label> needs to be
          matched by a closing tag after the value: </label>.
You will normally edit the file with a regular text editor, like, e.g. vi or notepad. Double-clicking the file in a file manager may not work, because this usually opens it in a WEB browser, which will not let you modify the contents.
The advanced search dialog helps you build more complex queries without memorizing the search language constructs. It can be opened through the Tools menu or through the main toolbar.
Recoll keeps a history of searches. See Advanced search history.
The dialog has two tabs:
The first tab lets you specify terms to search for, and permits specifying multiple clauses which are combined to build the search.
The second tab lets filter the results according to file size, date of modification, MIME type, or location.
Click on the Start Search button in the advanced search dialog, or type Enter in any text field to start the search. The button in the main window always performs a simple search.
Click on the Show query
          details link at the top of the result page to see
          the query expansion.
This part of the dialog lets you constructc a query by combining multiple clauses of different types. Each entry field is configurable for the following modes:
All terms.
Any term.
None of the terms.
Phrase (exact terms in order within an adjustable window).
Proximity (terms in any order within an adjustable window).
Filename search.
Additional entry fields can be created by clicking the Add clause button.
When searching, the non-empty clauses will be combined either with an AND or an OR conjunction, depending on the choice made on the left (All clauses or Any clause).
Entries of all types except "Phrase" and "Near" accept a mix of single words and phrases enclosed in double quotes. Stemming and wildcard expansion will be performed as for simple search.
Phrases and Proximity searches. These
            two clauses work in similar ways, with the difference
            that proximity searches do not impose an order on the
            words. In both cases, an adjustable number (slack) of
            non-matched words may be accepted between the searched
            ones (use the counter on the left to adjust this
            count). For phrases, the default count is zero (exact
            match). For proximity it is ten (meaning that two
            search terms, would be matched if found within a window
            of twelve words). Examples: a phrase search for
            quick fox with a slack of
            0 will match quick fox but
            not quick brown fox. With
            a slack of 1 it will match the latter, but not
            fox quick. A proximity
            search for quick fox with
            the default slack will match the latter, and also
            a fox is a cunning and quick
            animal.
This part of the dialog has several sections which allow filtering the results of a search according to a number of criteria
The first section allows filtering by dates of last modification. You can specify both a minimum and a maximum date. The initial values are set according to the oldest and newest documents found in the index.
The next section allows filtering the results
                  by file size. There are two entries for minimum
                  and maximum size. Enter decimal numbers. You can
                  use suffix multipliers: k/K, m/M, g/G, t/T for 1E3, 1E6, 1E9, 1E12
                  respectively.
The next section allows filtering the results by their MIME types, or MIME categories (ie: media/text/message/etc.).
You can transfer the types between two boxes, to define which will be included or excluded by the search.
The state of the file type selection can be saved as the default (the file type filter will not be activated at program start-up, but the lists will be in the restored state).
The bottom section allows restricting the search results to a sub-tree of the indexed area. You can use the Invert checkbox to search for files not in the sub-tree instead. If you use directory filtering often and on big subsets of the file system, you may think of setting up multiple indexes instead, as the performance may be better.
You can use relative/partial paths for
                  filtering. Ie, entering dirA/dirB would match either
                  /dir1/dirA/dirB/myfile1 or
                  /dir2/dirA/dirB/someother/myfile2.
The advanced search tool memorizes the last 100 searches performed. You can walk the saved searches by using the up and down arrow keys while the keyboard focus belongs to the advanced search dialog.
The complex search history can be erased, along with the one for simple search, by selecting the → menu entry.
Recoll automatically manages the expansion of search terms to their derivatives (ie: plural/singular, verb inflections). But there are other cases where the exact search term is not known. For example, you may not remember the exact spelling, or only know the beginning of the name.
The search will only propose replacement terms with spelling variations when no matching document were found. In some cases, both proper spellings and mispellings are present in the index, and it may be interesting to look for them explicitly.
The term explorer tool (started from the toolbar icon or from the Term explorer entry of the Tools menu) can be used to search the full index terms list. It has three modes of operations:
In this mode of operation, you can enter a
                search string with shell-like wildcards (*, ?, []).
                ie: xapi*
                would display all index terms beginning with
                xapi.
                (More about wildcards here ).
This mode will accept a regular expression as
                input. Example: word[0-9]+. The
                expression is implicitly anchored at the beginning.
                Ie: press
                will match pression but not
                expression. You can
                use .*press to match
                the latter, but be aware that this will cause a
                full index term list scan, which can be quite
                long.
This mode will perform the usual stem expansion normally done as part user input processing. As such it is probably mostly useful to demonstrate the process.
In this mode, you enter the term as you think it is spelled, and Recoll will do its best to find index terms that sound like your entry. This mode uses the Aspell spelling application, which must be installed on your system for things to work (if your documents contain non-ascii characters, Recoll needs an aspell version newer than 0.60 for UTF-8 support). The language which is used to build the dictionary out of the index terms (which is done at the end of an indexing pass) is the one defined by your NLS environment. Weird things will probably happen if languages are mixed up.
This will print a long list of boring numbers about the index
This will show the files which caused errors, usually because recollindex could not translate their format into text.
Note that in cases where Recoll does not know the beginning
          of the string to search for (ie a wildcard expression
          like *coll),
          the expansion can take quite a long time because the full
          index term list will have to be processed. The expansion
          is currently limited at 10000 results for wildcards and
          regular expressions. It is possible to change the limit
          in the configuration file.
Double-clicking on a term in the result list will insert it into the simple search entry field. You can also cut/paste between the result list and any entry field (the end of lines will be taken care of).
See the section describing the use of multiple indexes for generalities. Only the aspects concerning the recoll GUI are described here.
A recoll program instance is always associated with a specific index, which is the one to be updated when requested from the menu, but it can use any number of Recoll indexes for searching. The external indexes can be selected through the external indexes tab in the preferences dialog.
Index selection is performed in two phases. A set of all usable indexes must first be defined, and then the subset of indexes to be used for searching. These parameters are retained across program executions (there are kept separately for each Recoll configuration). The set of all indexes is usually quite stable, while the active ones might typically be adjusted quite frequently.
The main index (defined by RECOLL_CONFDIR) is always active. If this
          is undesirable, you can set up your base configuration to
          index an empty directory.
When adding a new index to the set, you can select either a Recoll configuration directory, or directly a Xapian index directory. In the first case, the Xapian index directory will be obtained from the selected configuration.
As building the set of all indexes can be a little
          tedious when done through the user interface, you can use
          the RECOLL_EXTRA_DBS
          environment variable to provide an initial set. This
          might typically be set up by a system administrator so
          that every user does not have to do it. The variable
          should define a colon-separated list of index
          directories, ie:
export RECOLL_EXTRA_DBS=/some/place/xapiandb:/some/other/db
Another environment variable, RECOLL_ACTIVE_EXTRA_DBS allows adding to
          the active list of indexes. This variable was suggested
          and implemented by a Recoll user. It is mostly useful if
          you use scripts to mount external volumes with
          Recoll indexes. By using
          RECOLL_EXTRA_DBS and
          RECOLL_ACTIVE_EXTRA_DBS, you
          can add and activate the index for the mounted volume
          when starting recoll. Unreachable
          indexes will automatically be deactivated when starting
          up.
Documents that you actually view (with the internal preview or an external tool) are entered into the document history, which is remembered.
You can display the history list by using the Tools/Doc History menu entry.
You can erase the document history by using the Erase document history entry in the menu.
The documents in a result list are normally sorted in order of relevance. It is possible to specify a different sort order, either by using the vertical arrows in the GUI toolbox to sort by date, or switching to the result table display and clicking on any header. The sort order chosen inside the result table remains active if you switch back to the result list, until you click one of the vertical arrows, until both are unchecked (you are back to sort by relevance).
Sort parameters are remembered between program invocations, but result sorting is normally always inactive when the program starts. It is possible to keep the sorting activation state between program invocations by checking the Remember sort activation state option in the preferences.
It is also possible to hide duplicate entries inside the result list (documents with the exact same contents as the displayed one). The test of identity is based on an MD5 hash of the document container, not only of the text contents (so that ie, a text document with an image added will not be a duplicate of the text only). Duplicates hiding is controlled by an entry in the GUI configuration dialog, and is off by default.
When a result document does have undisplayed
          duplicates, a Dups link will
          be shown with the result list entry. Clicking the link
          will display the paths (URLs + ipaths) for the duplicate
          entries.
A number of common actions within the graphical interface can be triggered through keyboard shortcuts. As of Recoll 1.29, many of the shortcut values can be customised from a screen in the GUI preferences. Most shortcuts are specific to a given context (e.g. within a preview window, within the result table).
Most shortcuts can be changed to a preferred value by using the GUI shortcut editor: → → . In order to change a shortcut, just click the corresponding cell in the Shortcut column, and type the desired sequence.
Table 3.1. Keyboard shortcuts
| Description | Default value | 
|---|---|
| Context: almost everywhere | |
| Program exit | Ctrl+Q | 
| Context: advanced search | |
| Load the next entry from the search history | Up | 
| Load the previous entry from the search history | Down | 
| Context: main window | |
| Clear search. This will move the keyboard cursor to the simple search entry and erase the current text | Ctrl+S | 
| Move the keyboard cursor to the search entry area without erasing the current text | Ctrl+L | 
| Move the keyboard cursor to the search entry area without erasing the current text | Ctrl+Shift+S | 
| Toggle displaying the current results as a table or as a list | Ctrl+T | 
| Context: main window, when showing the results as a table | |
| Move the keyboard cursor to currently the selected row in the table, or to the first one if none is selected | Ctrl+R | 
| Jump to row 0-9 or a-z in the table | Ctrl+[0-9] or Ctrl+Shift+[a-z] | 
| Cancel the current selection | Esc | 
| Context: preview window | |
| Close the preview window | Esc | 
| Close the current tab | Ctrl+W | 
| Open a print dialog for the current tab contents | Ctrl+P | 
| Load the next result from the list to the current tab | Shift+Down | 
| Load the previous result from the list to the current tab | Shift+Up | 
| Context: result table | |
| Copy the text contained in the selected document to the clipboard | Ctrl+G | 
| Copy the text contained in the selected document to the clipboard, then exit recoll | Ctrl+Alt+Shift+G | 
| Open the current document | Ctrl+O | 
| Open the current document and exit Recoll | Ctrl+Alst+Shift+O | 
| Show a full preview for the current document | Ctrl+D | 
| Toggle showing the column names | Ctrl+H | 
| Show a snippets (keyword in context) list for the current document | Ctrl+E | 
| Toggle showing the row letters/numbers | Ctrl+V | 
| Context: snippets window | |
| Close the snippets window | Esc | 
| Find in the snippets list (method #1) | Ctrl+F | 
| Find in the snippets list (method #2) | / | 
| Find the next instance of the search term | F3 | 
| Find the previous instance of the search term | Shift+F3 | 
Term completion. While typing into the simple search entry, a popup menu will appear and show completions for the current string. Values preceded by a clock icon come from the history, those preceded by a magnifier icon come from the index terms. This can be disabled in the preferences.
Picking up new terms from result or preview text. Double-clicking on a word in the result list or in a preview window will copy it to the simple search entry field.
Wildcards. Wildcards can be used inside search terms in all forms of searches. More about wildcards.
Automatic suffixes. Words like
            odt or ods can be automatically turned into
            query language ext:xxx
            clauses. This can be enabled in the Search preferences panel in the
            GUI.
Disabling stem expansion. Entering a
            capitalized word in any search field will prevent stem
            expansion (no search for gardening if you enter Garden instead of garden). This is the only case where
            character case should make a difference for a
            Recoll search. You can
            also disable stem expansion or change the stemming
            language in the preferences.
Finding related documents. Selecting the Find similar documents entry in the result list paragraph right-click menu will select a set of "interesting" terms from the current result, and insert them into the simple search entry field. You can then possibly edit the list and start a search to find documents which may be apparented to the current result.
File names. File names are added as terms during indexing, and you can specify them as ordinary terms in normal search fields (Recoll used to index all directories in the file path as terms. This has been abandoned as it did not seem really useful). Alternatively, you can use the specific file name search which will only look for file names, and may be faster than the generic search especially when using wildcards.
Phrases searches. A phrase can be looked
            for by enclosing a number of terms in double quotes.
            Example: "user manual"
            will look only for occurrences of user immediately followed by
            manual. You can use the
            "Phrase" field of the
            advanced search dialog to the same effect. Phrases can
            be entered along simple terms in all simple or advanced
            search entry fields, except "Phrase".
Proximity searches. A proximity search differs from a phrase search in that it does not impose an order on the terms. Proximity searches can be entered by specifying the "Proximity" type in the advanced search, or by postfixing a phrase search with a 'p'. Example: "user manual"p would also match "manual user". Also see the modifier section from the query language documentation.
AutoPhrases. This option can be set in
            the preferences dialog. If it is set, a phrase will be
            automatically built and added to simple searches when
            looking for Any terms.
            This will not change radically the results, but will
            give a relevance boost to the results where the search
            terms appear as a phrase. Ie: searching for
            virtual reality will still
            find all documents where either virtual or reality or both appear, but those
            which contain virtual
            reality should appear sooner in the list.
Phrase searches can slow down a query if most of the
            terms in the phrase are common. If the autophrase option is on, very common
            terms will be removed from the automatically
            constructed phrase. The removal threshold can be
            adjusted from the search preferences.
Phrases and abbreviations. Dotted
            abbreviations like I.B.M.
            are also automatically indexed as a word without the
            dots: IBM. Searching for
            the word inside a phrase (ie: "the IBM company") will only match the
            dotted abrreviation if you increase the phrase slack
            (using the advanced search panel control, or the
            o query language
            modifier). Literal occurrences of the word will be
            matched normally.
Using fields. You can use the query language and
            field specifications to only search certain parts of
            documents. This can be especially helpful with email,
            for example only searching emails from a specific
            originator: search tips
            from:helpfulgui
Adjusting the result table columns. When displaying results in table mode, you can use a right click on the table headers to activate a pop-up menu which will let you adjust what columns are displayed. You can drag the column headers to adjust their order. You can click them to sort by the field displayed in the column. You can also save the result list in CSV format.
Changing the GUI geometry. It is possible to configure the GUI in wide form factor by dragging the toolbars to one of the sides (their location is remembered between sessions), and moving the category filters to a menu (can be set in the → → panel).
Query explanation. You can get an exact description of what the query looked for, including stem expansion, and Boolean operators used, by clicking on the result list header.
Advanced search history. You can display any of the last 100 complex searches performed by using the up and down arrow keys while the advanced search panel is active.
Forced opening of a preview window. You
            can use Shift+Click on a
            result list Preview link
            to force the creation of a preview window instead of a
            new tab in the existing one.
Both simple and advanced query dialogs save recent history, but the amount is limited: old queries will eventually be forgotten. Also, important queries may be difficult to find among others. This is why both types of queries can also be explicitly saved to files, from the GUI menus: →
The default location for saved queries is a subdirectory of the current configuration directory, but saved queries are ordinary files and can be written or moved anywhere.
Some of the saved query parameters are part of the
          preferences (e.g. autophrase
          or the active external indexes), and may differ when the
          query is loaded from the time it was saved. In this case,
          Recoll will warn of the
          differences, but will not change the user
          preferences.
You can customize some aspects of the search interface by using the entry in the menu.
There are several tabs in the dialog, dealing with the interface itself, the parameters used for searching and returning results, and what indexes are searched.
Highlight color for query
                terms: Terms from the user query are
                highlighted in the result list samples and the
                preview window. The color can be chosen here. Any
                Qt color string should work (ie red, #ff0000). The default is
                blue.
Style sheet: The
                name of a Qt style
                sheet text file which is applied to the whole
                Recoll application on startup. The default value is
                empty, but there is a skeleton style sheet
                (recoll.qss) inside
                the /usr/share/recoll/examples
                directory. Using a style sheet, you can change most
                recoll graphical
                parameters: colors, fonts, etc. See the sample file
                for a few simple examples.
You should be aware that parameters (e.g.: the background color) set inside the Recoll GUI style sheet will override global system preferences, with possible strange side effects: for example if you set the foreground to a light color and the background to a dark one in the desktop preferences, but only the background is set inside the Recoll style sheet, and it is light too, then text will appear light-on-light inside the Recoll GUI.
Maximum text size highlighted for preview Inserting highlights on search term inside the text before inserting it in the preview window involves quite a lot of processing, and can be disabled over the given text size to speed up loading.
Prefer HTML to plain text for preview if set, Recoll will display HTML as such inside the preview window. If this causes problems with the Qt HTML display, you can uncheck it to display the plain text version instead.
Activate links in preview if set, Recoll will turn HTTP links found inside plain text into proper HTML anchors, and clicking a link inside a preview window will start the default browser on the link target.
Plain text to HTML line style: when displaying plain text inside the preview window, Recoll tries to preserve some of the original text line breaks and indentation. It can either use PRE HTML tags, which will well preserve the indentation but will force horizontal scrolling for long lines, or use BR tags to break at the original line breaks, which will let the editor introduce other line breaks according to the window width, but will lose some of the original indentation. The third option has been available in recent releases and is probably now the best one: use PRE tags with line wrapping.
Choose editor application: this opens a dialog which allows you to select the application to be used to open each MIME type. The default is to use the xdg-open utility, but you can use this dialog to override it, setting exceptions for MIME types that will still be opened according to Recoll preferences. This is useful for passing parameters like page numbers or search strings to applications that support them (e.g. evince). This cannot be done with xdg-open which only supports passing one parameter.
Disable Qt autocompletion in search entry: this will disable the completion popup. Il will only appear, and display the full history, either if you enter only white space in the search area, or if you click the clock button on the right of the area.
Document filter choice style: this will let you choose if the document categories are displayed as a list or a set of buttons, or a menu.
Start with simple search
                mode: this lets you choose the value of the
                simple search type on program startup. Either a
                fixed value (e.g. Query
                Language, or the value in use when the
                program last exited.
Start with advanced search dialog open : If you use this dialog frequently, checking the entries will get it to open when recoll starts.
Remember sort activation state if set, Recoll will remember the sort tool stat between invocations. It normally starts with sorting disabled.
Number of results in a result page
Result list font: There is quite a lot of information shown in the result list, and you may want to customize the font and/or font size. The rest of the fonts used by Recoll are determined by your generic Qt config (try the qtconfig command).
Edit result list paragraph format string: allows you to change the presentation of each result list entry. See the result list customisation section.
Edit result page HTML header insert: allows you to define text inserted at the end of the result page HTML header. More detail in the result list customisation section.
Date format: allows specifying the format used for displaying dates inside the result list. This should be specified as an strftime() string (man strftime).
Abstract snippet separator: for synthetic abstracts built from index data, which are usually made of several snippets from different parts of the document, this defines the snippet separator, an ellipsis by default.
Hide duplicate results: decides if result list entries are shown for identical documents found in different places.
Stemming language: stemming obviously depends on the document's language. This listbox will let you chose among the stemming databases which were built during indexing (this is set in the main configuration file), or later added with recollindex -s (See the recollindex manual). Stemming languages which are dynamically added will be deleted at the next indexing pass unless they are also added in the configuration file.
Automatically add phrase
                to simple searches: a phrase will be
                automatically built and added to simple searches
                when looking for Any
                terms. This will give a relevance boost to
                the results where the search terms appear as a
                phrase (consecutive and in order).
Autophrase term frequency threshold percentage: very frequent terms should not be included in automatic phrase searches for performance reasons. The parameter defines the cutoff percentage (percentage of the documents where the term appears).
Replace abstracts from documents: this decides if we should synthesize and display an abstract in place of an explicit abstract found within the document itself.
Dynamically build abstracts: this decides if Recoll tries to build document abstracts (lists of snippets) when displaying the result list. Abstracts are constructed by taking context from the document information, around the search terms.
Synthetic abstract size: adjust to taste...
Synthetic abstract context words: how many words should be displayed around each term occurrence.
Query language magic file
                name suffixes: a list of words which
                automatically get turned into ext:xxx file name suffix clauses
                when starting a query language query (e.g.:
                doc xls xlsx...). This
                will save some typing for people who use file types
                a lot when querying.
External
          indexes: This panel will let you browse for
          additional indexes that you may want to search. External
          indexes are designated by their database directory (ie:
          /home/someothergui/.recoll/xapiandb,
          /usr/local/recollglobal/xapiandb).
Once entered, the indexes will appear in the External indexes list, and you can chose which ones you want to use at any moment by checking or unchecking their entries.
Your main database (the one the current configuration indexes to), is always implicitly active. If this is not desirable, you can set up your configuration so that it indexes, for example, an empty directory. An alternative indexer may also need to implement a way of purging the index from stale data,
Recoll normally uses a full function HTML processor to display the result list and the snippets window. Depending on the version, this may be based on either Qt WebKit or Qt WebEngine. It is then possible to completely customise the result list with full support for CSS and Javascript.
It is also possible to build Recoll to use a simpler Qt QTextBrowser widget to display the HTML, which may be necessary if the ones above are not ported on the system, or to reduce the application size and dependencies. There are limits to what you can do in this case, but it is still possible to decide what data each result will contain, and how it will be displayed.
The result list presentation can be customized by adjusting two elements:
The paragraph format
HTML code inside the header section. For versions 1.21 and later, this is also used for the snippets window.
The paragraph format and the header fragment can be edited from the Result list tab of the GUI configuration.
The header fragment is used both for the result list
            and the snippets window. The snippets list is a table
            and has a snippets class
            attribute. Each paragraph in the result list is a
            table, with class respar,
            but this can be changed by editing the paragraph
            format.
There are a few examples on the page about customising the result list on the Recoll web site.
This is an arbitrary HTML string where the
              following printf-like %
              substitutions will be performed:
%A. Abstract
%D. Date
%I. Icon image name. This is
                    normally determined from the MIME type. The
                    associations are defined inside the mimeconf configuration
                    file. If a thumbnail for the file is found
                    at the standard Freedesktop location, this will
                    be displayed instead.
%K. Keywords (if any)
%L. Precooked Preview, Edit, and possibly Snippets links
%M. MIME type
%N. result Number inside the result page
%P. Parent folder Url. In the case of an embedded document, this is the parent folder for the top level container file.
%R. Relevance percentage
%S. Size information
%T. Title or Filename if not set.
%t. Title or empty.
%(filename). File name.
%U. Url
The format of the Preview, Edit, and Snippets
              links is <a
              href="P%N">, <a
              href="E%N"> and <a
              href="A%N"> where docnum (%N) expands
              to the document number inside the result page).
A link target defined as "F%N" will open the document
              corresponding to the %P
              parent folder expansion, usually creating a file
              manager window on the folder where the container file
              resides. E.g.:
<a href="F%N">%P</a>
A link target defined as R%N|
              will run the corresponding script on the result file
              (if the document is embedded, the script will be
              started on the top-level parent). See the 
              section about defining scripts.scriptname
In addition to the predefined values above, all
              strings like %(fieldname) will be replaced by the
              value of the field named fieldname for this document. Only
              stored fields can be accessed in this way, the value
              of indexed but not stored fields is not known at this
              point in the search process (see field
              configuration). There are currently very few
              fields stored by default, apart from the values above
              (only author and
              filename), so this
              feature will need some custom local configuration to
              be useful. An example candidate would be the
              recipient field which is
              generated by the message input handlers.
The default value for the paragraph format string is:
            "<table class=\"respar\">\n"
            "<tr>\n"
            "<td><a href='%U'><img src='%I' width='64'></a></td>\n"
            "<td>%L  <i>%S</i>   <b>%T</b><br>\n"
            "<span style='white-space:nowrap'><i>%M</i> %D</span>    <i>%U</i> %i<br>\n"
            "%A %K</td>\n"
            "</tr></table>\n"
            
              You may, for example, try the following for a more web-like experience:
            <u><b><a href="P%N">%T</a></b></u><br>
            %A<font color=#008000>%U - %S</font> - %L
            
              Note that the P%N link in the above paragraph makes the title a preview link. Or the clean looking:
            <img src="%I" align="left">%L <font color="#900000">%R</font>
              <b>%T&</b><br>%S 
            <font color="#808080"><i>%U</i></font>
            <table bgcolor="#e0e0e0">
            <tr><td><div>%A</div></td></tr>
            </table>%K
            
              These samples, and some others are on the web site, with pictures to show how they look.
It is also possible to define the value of the snippet separator inside the abstract section.
The Recoll KIO slave allows performing a Recoll search by entering an appropriate URL in a KDE open dialog, or with an HTML-based interface displayed in Konqueror.
The HTML-based interface is similar to the Qt-based interface, but slightly less powerful for now. Its advantage is that you can perform your search while staying fully within the KDE framework: drag and drop from the result list works normally and you have your normal choice of applications for opening files.
The alternative interface uses a directory view of search results. Due to limitations in the current KIO slave interface, it is currently not obviously useful (to me).
The interface is described in more detail inside a
          help file which you can access by entering recoll:/ inside the konqueror URL line
          (this works only if the recoll KIO slave has been
          previously installed).
The instructions for building this module are located
          in the source tree. See: kde/kio/recoll/00README.txt. Some Linux
          distributions do package the kio-recoll module, so check
          before diving into the build process, maybe it's already
          out there ready for one-click installation.
As a sample application, the Recoll KIO slave could allow preparing a set of HTML documents (for example a manual) so that they become their own search interface inside konqueror.
This can be done by either explicitly inserting
          <a
          href="recoll://..."> links around some document
          areas, or automatically by adding a very small
          javascript program to
          the documents, like the following example, which would
          initiate a search by double-clicking any term:
<script language="JavaScript">
        function recollsearch() {
        var t = document.getSelection();
        window.location.href = 'recoll://search/query?qtp=a&p=0&q=' +
        encodeURIComponent(t);
        }
        </script>
        ....
        <body ondblclick="recollsearch()">
        
        There are several ways to obtain search results as a text stream, without a graphical interface:
By passing option -t
              to the recoll program, or
              by calling it as recollq (through a
              link).
By using the recollq program.
By writing a custom Python program, using the Recoll Python API.
The first two methods work in the same way and
        accept/need the same arguments (except for the additional
        -t to recoll). The query to be
        executed is specified as command line arguments.
recollq is
        not always built by default. You can use the Makefile in the query directory to build it. This is a
        very simple program, and if you can program a little c++,
        you may find it useful to taylor its output format to your
        needs. Apart from being easily customised, recollq is only really
        useful on systems where the Qt libraries are not available,
        else it is redundant with recoll
        -t.
recollq has a man page. The Usage string follows:
recollq: usage:
 -P: Show the date span for all the documents present in the index
 [-o|-a|-f] [-q] <query string>
 Runs a recoll query and displays result lines. 
  Default: will interpret the argument(s) as a xesam query string
  Query elements: 
   * Implicit AND, exclusion, field spec:  t1 -t2 title:t3
   * OR has priority: t1 OR t2 t3 OR t4 means (t1 OR t2) AND (t3 OR t4)
   * Phrase: "t1 t2" (needs additional quoting on cmd line)
 -o Emulate the GUI simple search in ANY TERM mode
 -a Emulate the GUI simple search in ALL TERMS mode
 -f Emulate the GUI simple search in filename mode
 -q is just ignored (compatibility with the recoll GUI command line)
Common options:
 -c <configdir> : specify config directory, overriding $RECOLL_CONFDIR
 -d also dump file contents
 -n [first-]<cnt> define the result slice. The default value for [first]
    is 0. Without the option, the default max count is 2000.
    Use n=0 for no limit
 -b : basic. Just output urls, no mime types or titles
 -Q : no result lines, just the processed query and result count
 -m : dump the whole document meta[] array for each result
 -A : output the document abstracts
 -S fld : sort by field <fld>
   -D : sort descending
 -s stemlang : set stemming language to use (must exist in index...)
    Use -s "" to turn off stem expansion
 -T <synonyms file>: use the parameter (Thesaurus) for word expansion 
 -i <dbdir> : additional index, several can be given
 -e use url encoding (%xx) for urls
 -F <field name list> : output exactly these fields for each result.
    The field values are encoded in base64, output in one line and 
    separated by one space character. This is the recommended format 
    for use by other programs. Use a normal query with option -m to 
    see the field names. Use -F '' to output all fields, but you probably
    also want option -N in this case
  -N : with -F, print the (plain text) field names before the field values
      
        Sample execution:
recollq 'ilur -nautique mime:text/html'
Recoll query: ((((ilur:(wqf=11) OR ilurs) AND_NOT (nautique:(wqf=11) OR nautiques OR nautiqu OR nautiquement)) FILTER Ttext/html))
4 results
text/html       [file:///Users/uncrypted-dockes/projets/bateaux/ilur/comptes.html]      [comptes.html]  18593   bytes   
text/html       [file:///Users/uncrypted-dockes/projets/nautique/webnautique/articles/ilur1/index.html] [Constructio...
text/html       [file:///Users/uncrypted-dockes/projets/pagepers/index.html]    [psxtcl/writemime/recoll]...
text/html       [file:///Users/uncrypted-dockes/projets/bateaux/ilur/factEtCie/recu-chasse-maree....
      
      The Recoll query language was based on the now defunct Xesam user search language specification. It allows defining general boolean searches within the main body text or specific fields, and has many additional features, broadly equivalent to those provided by complex search interface in the GUI.
The query language processor is activated in the GUI
        simple search entry when the search mode selector is set to
        Query Language. It can also be
        used from the command line search, the KIO slave, or the
        WEB UI.
If the results of a query language search puzzle you and
        you doubt what has been actually searched for, you can use
        the GUI Show Query link at the
        top of the result list to check the exact query which was
        finally executed by Xapian.
Here follows a sample request that we are going to explain:
        author:"john doe" Beatles OR Lennon Live OR Unplugged -potatoes
      
          This would search for all documents with John Doe appearing as a
          phrase in the author field (exactly what this is would
          depend on the document type, ie: the From: header, for an email message), and
          containing either beatles or lennon and either
          live or
          unplugged but
          not potatoes
          (in any part of the document).
An element is composed of an optional field specification, and a value, separated by a colon (the field separator is the last colon in the element). Examples:
Eugenieauthor:balzacdc:title:grandetdc:title:"eugenie
              grandet"The colon, if present, means "contains". Xesam defines other relations, which are mostly unsupported for now (except in special cases, described further down).
All elements in the search entry are normally combined
          with an implicit AND. It is possible to specify that
          elements be OR'ed instead, as in Beatles OR Lennon. The OR must be entered literally (capitals),
          and it has priority over the AND associations: word1 word2 OR word3 means word1 AND (word2 OR word3) not (word1 AND word2) OR word3.
You can use parentheses to group elements (from version 1.21), which will sometimes make things clearer, and may allow expressing combinations which would have been difficult otherwise.
An element preceded by a - specifies a term that should
          not appear.
As usual, words inside quotes define a phrase (the
          order of words is significant), so that title:"prejudice pride"
          is not the same as title:prejudice
          title:pride, and is unlikely to find a
          result.
Words inside phrases and capitalized words are not stem-expanded. Wildcards may be used anywhere inside a term. Specifying a wildcard on the left of a term can produce a very slow search (or even an incorrect one if the expansion is truncated because of excessive size). Also see More about wildcards.
To save you some typing, Recoll versions 1.20 and later interpret a field value given as a comma-separated list of terms as an AND list and a slash-separated list as an OR list. No white space is allowed. So
author:john,lennon
will search for documents with john and lennon inside the author field (in any order), and
author:john/ringo
would search for john or
          ringo. This behaviour is
          only triggered by a field prefix: without it, comma- or
          slash- separated input will produce a phrase search.
          However, you can use a text
          field name to search the main text this way, as an
          alternate to using an explicit OR, e.g. text:napoleon/bonaparte would generate a
          search for napoleon or bonaparte in the main
          text body.
Modifiers can be set on a double-quote value, for
          example to specify a proximity search (unordered). See
          the modifier section. No
          space must separate the final double-quote and the
          modifiers value, e.g. "two
          one"po10
Recoll currently manages the following default fields:
title, subject or caption are synonyms which specify
                data to be searched for in the document title or
                subject.
author or
                from for searching the
                documents originators.
recipient or
                to for searching the
                documents recipients.
keyword for
                searching the document-specified keywords (few
                documents actually have any).
filename for the
                document's file name. You can use the shorter
                fn alias. This value
                is not set for all documents: internal documents
                contained inside a compound one (for example an
                EPUB section) do not inherit the container file
                name any more, this was replaced by an explicit
                field (see next). Sub-documents can still have a
                filename, if it is
                implied by the document format, for example the
                attachment file name for an email attachment.
containerfilename,
                aliased as cfn. This
                is set for all documents, both top-level and
                contained sub-documents, and is always the name of
                the filesystem file which contains the data. The
                terms from this field can only be matched by an
                explicit field specification (as opposed to terms
                from filename which
                are also indexed as general document content). This
                avoids getting matches for all the sub-documents
                when searching for the container file name.
ext specifies the
                file name extension (Ex: ext:html).
rclmd5 the MD5
                checksum for the document. This is used for
                displaying the duplicates of a search result (when
                querying with the option to collapse duplicate
                results). Incidentally, this could be used to find
                the duplicates of any given file by computing its
                MD5 checksum and executing a query with just the
                rclmd5 value.
You can define aliases for field names, in order to
          use your preferred denomination or to save typing (e.g.
          the predefined fn and
          cfn aliases defined for
          filename and containerfilename). See the section about the
          fields file.
The document input handlers have the possibility to create other fields with arbitrary names, and aliases may be defined in the configuration, so that the exact field search possibilities may be different for you if someone took care of the customisation.
The field syntax also supports a few field-like, but special, criteria, for which the values are interpreted differently. Regular processing does not apply (for example the slash- or comma- separated lists don't work). A list follows.
dir
                for filtering the results on file location. For
                example, dir:/home/me/somedir will restrict
                the search to results found anywhere under the
                /home/me/somedir
                directory (including subdirectories).
Tilde expansion will be performed as usual. Wildcards will be expanded, but please have a look at an important limitation of wildcards in path filters.
You can also use relative paths. For example,
                dir:share/doc would
                match either /usr/share/doc or /usr/local/share/doc.
-dir will find
                results not
                in the specified location.
Several dir clauses
                can be specified, both positive and negative. For
                example the following makes sense:
dir:recoll dir:src -dir:utils -dir:common
This would select results which have both
                recoll and
                src in the path (in
                any order), and which have not either utils or common.
You can also use OR
                conjunctions with dir:
                clauses.
A special aspect of dir clauses is that the values in
                the index are not transcoded to UTF-8, and never
                lower-cased or unaccented, but stored as binary.
                This means that you need to enter the values in the
                exact lower or upper case, and that searches for
                names with diacritics may sometimes be impossible
                because of character set conversion issues.
                Non-ASCII UNIX file paths are an unending source of
                trouble and are best avoided.
You need to use double-quotes around the path value if it contains space characters.
The shortcut syntax to define OR or AND lists within fields with commas or slash characters is not available.
size for filtering
                the results on file size. Example: size<10000. You can use
                <, > or = as operators. You can specify a
                range like the following: size>100 size<1000. The
                usual k/K, m/M, g/G,
                t/T can be used as (decimal) multipliers.
                Ex: size>1k to
                search for files bigger than 1000 bytes.
date for searching
                or filtering on dates. The syntax for the argument
                is based on the ISO8601 standard for dates and time
                intervals. Only dates are supported, no times. The
                general syntax is 2 elements separated by a
                / character. Each
                element can be a date or a period of time. Periods
                are specified as PnYnMnD. The n numbers are the
                respective numbers of years, months or days, any of
                which may be missing. Dates are specified as
                YYYY-MM-DD. The days and
                months parts may be missing. If the / is present but an element is
                missing, the missing element is interpreted as the
                lowest or highest date in the index. Examples:
2001-03-01/2002-05-01 the
                      basic syntax for an interval of dates.
2001-03-01/P1Y2M the same
                      specified with a period.
2001/ from
                      the beginning of 2001 to the latest date in
                      the index.
2001 the
                      whole year of 2001
P2D/ means 2
                      days ago up to now if there are no documents
                      with dates in the future.
/2003 all
                      documents from 2003 or older.
Periods can also be specified with small letters (ie: p2y).
mime or
                format for specifying
                the MIME type. These clauses are processed apart
                from the normal Boolean logic of the search:
                multiple values will be OR'ed (instead of the
                normal AND). You can specify types to be excluded,
                with the usual -, and
                use wildcards. Example: mime:text/*
                -mime:text/plain. Specifying an
                explicit boolean operator before a mime specification is not
                supported and will produce strange results.
type or
                rclcat for specifying
                the category (as in text/media/presentation/etc.).
                The classification of MIME types in categories is
                defined in the Recoll configuration
                (mimeconf), and can
                be modified or extended. The default category names
                are those which permit filtering results in the
                main GUI screen. Categories are OR'ed like MIME
                types above, and can be negated with -.
issub for
                specifying that only standalone (issub:0) or only embedded
                (issub:1) documents
                should be returned as results.
mime, rclcat, size, issub and date criteria always affect the whole
            query (they are applied as a final filter), even if set
            with other terms inside a parenthese.
mime (or the equivalent
            rclcat) is the
            only field with
            an OR default. You do need
            to use OR with
            ext terms for example.
Recoll 1.24 and later support range clauses on fields which have been configured to support it. No default field uses them currently, so this paragraph is only interesting if you modified the fields configuration and possibly use a custom input handler.
A range clause looks like one of the following:
myfield:small..bigmyfield:small..myfield:..big
The nature of the clause is indicated by the two dots
          .., and the effect is to
          filter the results for which the myfield value is in the
          possibly open-ended interval.
See the section about the fields configuration file for the
          details of configuring a field for range searches (list
          them in the [values] section).
Some characters are recognized as search modifiers
          when found immediately after the closing double quote of
          a phrase, as in "some
          term"modifierchars. The actual "phrase" can be a
          single term of course. Supported modifiers:
l can be used to
                turn off stemming (mostly makes sense with
                p because stemming is
                off by default for phrases).
s can be used to
                turn off synonym expansion, if a synonyms file is
                in place (only for Recoll 1.22 and later).
o can be used to
                specify a "slack" for phrase and proximity
                searches: the number of additional terms that may
                be found between the specified ones. If
                o is followed by an
                integer number, this is the slack, else the default
                is 10.
p can be used to
                turn the default phrase search into a proximity one
                (unordered). Example: "order
                any in"p
C will turn on case
                sensitivity (if the index supports it).
D will turn on
                diacritics sensitivity (if the index supports
                it).
A weight can be specified for a query element by
                specifying a decimal value at the start of the
                modifiers. Example: "Important"2.5.
Some special characters are interpreted by Recoll in search strings to expand or specialize the search. Wildcards expand a root term in controlled ways. Anchor characters can restrict a search to succeed only if the match is found at or near the beginning of the document or one of its fields.
All words entered in Recoll search fields will be processed for wildcard expansion before the request is finally executed.
The wildcard characters are:
* which matches 0
                or more characters.
? which matches a
                single character.
[] which allow
                defining sets of characters to be matched (ex:
                [abc] matches a single character which
                may be 'a' or 'b' or 'c', [0-9] matches any number.
You should be aware of a few things when using wildcards.
Using a wildcard character at the beginning of a
                word can make for a slow search because
                Recoll will have
                to scan the whole index term list to find the
                matches. However, this is much less a problem for
                field searches, and queries like author:*@domain.com
                can sometimes be very useful.
For Recoll version 18 only, when working with a raw index (preserving character case and diacritics), the literal part of a wildcard expression will be matched exactly for case and diacritics. This is not true any more for versions 19 and later.
Using a * at the
                end of a word can produce more matches than you
                would think, and strange search results. You can
                use the term
                explorer tool to check what completions exist
                for a given term. You can also see exactly what
                search was performed by clicking on the link at the
                top of the result list. In general, for natural
                language terms, stem expansion will produce better
                results than an ending * (stem expansion is turned off
                when any wildcard character appears in the
                term).
Due to the way that Recoll processes wildcards inside
            dir path filtering
            clauses, they will have a multiplicative effect on the
            query size. A clause containing wildcards in several
            paths elements, like, for example, dir:/home/me/*/*/docdir,
            will almost certainly fail if your indexed tree is of
            any realistic size.
Depending on the case, you may be able to work
            around the issue by specifying the paths elements more
            narrowly, with a constant prefix, or by using 2
            separate dir: clauses
            instead of multiple wildcards, as in dir:/home/me dir:docdir. The latter
            query is not equivalent to the initial one because it
            does not specify a number of directory levels, but
            that's the best we can do (and it may be actually more
            useful in some cases).
Two characters are used to specify that a search hit
          should occur at the beginning or at the end of the text.
          ^ at the beginning of a term
          or phrase constrains the search to happen at the start,
          $ at the end force it to
          happen at the end.
As this function is implemented as a phrase search it is possible to specify a maximum distance at which the hit should occur, either through the controls of the advanced search panel, or using the query language, for example, as in:
"^someterm"o10
which would force someterm to be found within 10 terms of
          the start of the text. This can be combined with a field
          search as in somefield:"^someterm"o10 or somefield:someterm$.
This feature can also be used with an actual phrase
          search, but in this case, the distance applies to the
          whole phrase and anchor, so that, for example,
          bla bla my unexpected term
          at the beginning of the text would be a match for
          "^my term"o5.
Anchored searches can be very useful for searches inside somewhat structured documents like scientific articles, in case explicit metadata has not been supplied (a most frequent case), for example for looking for matches inside the abstract or the list of authors (which occur at the top of the document).
Term synonyms and text search: in general, there are two main ways to use term synonyms for searching text:
At index creation time, they can be used to alter the indexed terms, either increasing or decreasing their number, by expanding the original terms to all synonyms, or by reducing all synonym terms to a canonical one.
At query time, they can be used to match texts containing terms which are synonyms of the ones specified by the user, either by expanding the query for all synonyms, or by reducing the user entry to canonical terms (the latter only works if the corresponding processing has been performed while creating the index).
Recoll only uses
        synonyms at query time. A user query term which part of a
        synonym group will be optionally expanded into an
        OR query for all terms in the
        group.
Synonym groups are defined inside ordinary text files. Each line in the file defines a group.
Example:
        hi hello "good morning"
        # not sure about "au revoir" though. Is this english ?
        bye goodbye "see you" \
        "au revoir" 
      
        As usual, lines beginning with a # are comments, empty lines are ignored,
        and lines can be continued by ending them with a
        backslash.
Multi-word synonyms are supported, but be aware that these will generate phrase queries, which may degrade performance and will disable stemming expansion for the phrase terms.
The contents of the synonyms file must be casefolded
        (not only lowercased), because this is what expected at the
        point in the query processing where it is used. There are a
        few cases where this makes a difference, for example,
        German sharp s should be expressed as ss, Greek final sigma as sigma. For
        reference, Python3 has an easy way to casefold words
        (str.casefold()).
The synonyms file can be specified in the Search parameters tab of the GUI configuration Preferences menu entry, or as an option for command-line searches.
Once the file is defined, the use of synonyms can be enabled or disabled directly from the Preferences menu.
The synonyms are searched for matches with user terms after the latter are stem-expanded, but the contents of the synonyms file itself is not subjected to stem expansion. This means that a match will not be found if the form present in the synonyms file is not present anywhere in the document set (same with accents when using a raw index).
The synonyms function is probably not going to help you find your letters to Mr. Smith. It is best used for domain-specific searches. For example, it was initially suggested by a user performing searches among historical documents: the synonyms file would contains nicknames and aliases for each of the persons of interest.
In some cases, the document paths stored inside the index do not match the actual ones, so that document previews and accesses will fail. This can occur in a number of circumstances:
When using multiple indexes it is a relatively
              common occurrence that some will actually reside on a
              remote volume, for example mounted via NFS. In this
              case, the paths used to access the documents on the
              local machine are not necessarily the same than the
              ones used while indexing on the remote machine. For
              example, /home/me may
              have been used as a topdirs elements while indexing, but
              the directory might be mounted as /net/server/home/me on the local
              machine.
The case may also occur with removable disks. It is perfectly possible to configure an index to live with the documents on the removable disk, but it may happen that the disk is not mounted at the same place so that the documents paths from the index are invalid.
As a last example, one could imagine that a big directory has been moved, but that it is currently inconvenient to run the indexer.
Recoll has a facility for rewriting access paths when extracting the data from the index. The translations can be defined for the main index and for any additional query index.
The path translation facility will be useful whenever the documents paths seen by the indexer are not the same as the ones which should be used at query time.
In the above NFS example, Recoll could be instructed to rewrite
        any file:///home/me URL from
        the index to file:///net/server/home/me, allowing
        accesses from the client.
The translations are defined in the ptrans configuration file, which can
        be edited by hand or from the GUI external indexes
        configuration dialog:  → , then click the
        Paths translations button on
        the right below the index list.
Due to a current bug, the GUI must be restarted after
          changing the ptrans values
          (even when they were changed from the GUI).
For Recoll versions 1.18 and later, and when working with a raw index (not the default), searches can be sensitive to character case and diacritics. How this happens is controlled by configuration variables and what search data is entered.
The general default is that searches entered without
        upper-case or accented characters are insensitive to case
        and diacritics. An entry of resume will match any of Resume, RESUME, résumé, Résumé etc.
Two configuration variables can automate switching on sensitivity (they were documented but actually did nothing until Recoll 1.22):
If this is set, search sensitivity to diacritics
              will be turned on as soon as an accented character
              exists in a search term. When the variable is set to
              true, resume will start
              a diacritics-unsensitive search, but résumé will be matched exactly. The
              default value is false.
If this is set, search sensitivity to character
              case will be turned on as soon as an upper-case
              character exists in a search term except for the first one.
              When the variable is set to true, us or Us will start a
              diacritics-unsensitive search, but US will be matched exactly. The
              default value is true (contrary to
              autodiacsens).
As in the past, capitalizing the first letter of a word will turn off its stem expansion and have no effect on case-sensitivity.
You can also explicitly activate case and diacritics
        sensitivity by using modifiers with the query language.
        C will make the term
        case-sensitive, and D will
        make it diacritics-sensitive. Examples:
        "us"C
      
        will search for the term us
        exactly (Us will not be a
        match).
        "resume"D
      
        will search for the term resume exactly (résumé will not be a match).
When either case or diacritics sensitivity is activated, stem expansion is turned off. Having both does not make much sense.
Being independent of the desktop type has its drawbacks: Recoll desktop integration is minimal. However there are a few tools available:
Users of recent Ubuntu-derived distributions, or any other Gnome desktop systems (e.g. Fedora) can install the Recoll GSSP (Gnome Shell Search Provider).
The KDE KIO Slave was described in a previous section. It can provide search results inside Dolphin.
If you use an oldish version of Ubuntu Linux, you may find the Ubuntu Unity Lens module useful.
There is also an independently developed Krunner plugin.
Here follow a few other things that may help.
It is surprisingly convenient to be able to show or hide the Recoll GUI with a single keystroke. Recoll comes with a small Python script, based on the libwnck window manager interface library, which will allow you to do just this. The detailed instructions are on this wiki page.
This is probably obsolete now. Anyway:
The Recoll source tree contains the source code to the recoll_applet, a small application derived from the find_applet. This can be used to add a small Recoll launcher to the KDE panel.
The applet is not automatically built with the main
          Recoll programs, nor is
          it included with the main source distribution (because
          the KDE build boilerplate makes it relatively big). You
          can download its source from the recoll.org download
          page. Use the omnipotent configure;make;make
          install incantation to build and
          install.
You can then add the applet to the panel by right-clicking the panel and choosing the Add applet entry.
The recoll_applet has a small text window where you can type a Recoll query (in query language form), and an icon which can be used to restrict the search to certain types of files. It is quite primitive, and launches a new recoll GUI instance every time (even if it is already running). You may find it useful anyway.
Recoll has an Application Programming Interface, usable both for indexing and searching, currently accessible from the Python language.
Another less radical way to extend the application is to write input handlers for new types of documents.
The processing of metadata attributes for documents
      (fields) is highly
      configurable.
The small programs or pieces of code which handle the
          processing of the different document types for
          Recoll used to be called
          filters, which is still
          reflected in the name of the directory which holds them
          and many configuration variables. They were named this
          way because one of their primary functions is to filter
          out the formatting directives and keep the text content.
          However these modules may have other behaviours, and the
          term input handler is now
          progressively substituted in the documentation.
          filter is still used in many
          places though.
Recoll input handlers cooperate to translate from the multitude of input document formats, simple ones as opendocument, acrobat, or compound ones such as Zip or Email, into the final Recoll indexing input format, which is plain text (in many cases the processing pipeline has an intermediary HTML step, which may be used for better previewing presentation). Most input handlers are executable programs or scripts. A few handlers are coded in C++ and live inside recollindex. This latter kind will not be described here.
There are two kinds of external executable input handlers:
Simple exec handlers
              run once and exit. They can be bare programs like
              antiword, or
              scripts using other programs. They are very simple to
              write, because they just need to print the converted
              document to the standard output. Their output can be
              plain text or HTML. HTML is usually preferred because
              it can store metadata fields and it allows preserving
              some of the formatting for the GUI preview. However,
              these handlers have limitations:
They can only process one document per file.
The output MIME type must be known and fixed.
The character encoding, if relevant, must be known and fixed (or possibly just depending on location).
Multiple execm
              handlers can process multiple files (sparing the
              process startup time which can be very significant),
              or multiple documents per file (e.g.: for archives or
              multi-chapter publications). They communicate with
              the indexer through a simple protocol, but are
              nevertheless a bit more complicated than the older
              kind. Most of the new handlers are written in
              Python (exception:
              rclimg
              which is written in Perl because exiftool has no real Python
              equivalent). The Python handlers use common modules
              to factor out the boilerplate, which can make them
              very simple in favorable cases. The subdocuments
              output by these handlers can be directly indexable
              (text or HTML), or they can be other simple or
              compound documents that will need to be processed by
              another handler.
In both cases, handlers deal with regular file system files, and can process either a single document, or a linear list of documents in each file. Recoll is responsible for performing up to date checks, deal with more complex embedding and other upper level issues.
A simple handler returning a document in text/plain format, can transfer no
        metadata to the indexer. Generic metadata, like document
        size or modification date, will be gathered and stored by
        the indexer.
Handlers that produce text/html format can return an arbitrary
        amount of metadata inside HTML meta tags. These will be processed
        according to the directives found in the fields configuration file.
The handlers that can handle multiple documents per file
        return a single piece of data to identify each document
        inside the file. This piece of data, called an ipath will be sent back by Recoll to extract the document at
        query time, for previewing, or for creating a temporary
        file to be opened by a viewer. These handlers can also
        return metadata either as HTML meta tags, or as named data through the
        communication protocol.
The following section describes the simple handlers, and
        the next one gives a few explanations about the
        execm ones. You could
        conceivably write a simple handler with only the elements
        in the manual. This will not be the case for the other
        ones, for which you will have to look at the code.
Recoll simple handlers are usually shell-scripts, but this is in no way necessary. Extracting the text from the native format is the difficult part. Outputting the format expected by Recoll is trivial. Happily enough, most document formats have translators or text extractors which can be called from the handler. In some cases the output of the translating program is completely appropriate, and no intermediate shell-script is needed.
Input handlers are called with a single argument which is the source file name. They should output the result to stdout.
When writing a handler, you should decide if it will output plain text or HTML. Plain text is simpler, but you will not be able to add metadata or vary the output character encoding (this will be defined in a configuration file). Additionally, some formatting may be easier to preserve when previewing HTML. Actually the deciding factor is metadata: Recoll has a way to extract metadata from the HTML header and use it for field searches..
The RECOLL_FILTER_FORPREVIEW environment
          variable (values yes,
          no) tells the handler if the
          operation is for indexing or previewing. Some handlers
          use this to output a slightly different format, for
          example stripping uninteresting repeated keywords (ie:
          Subject: for email) when
          indexing. This is not essential.
You should look at one of the simple handlers, for example rclps for a starting point.
Don't forget to make your handler executable before testing !
If you can program and want to write an execm handler, it should not be too
          difficult to make sense of one of the existing
          handlers.
The existing handlers differ in the amount of helper code which they are using:
rclimg is written
                in Perl and handles the execm protocol all by
                itself (showing how trivial it is).
All the Python handlers share at least the
                rclexecm.py module,
                which handles the communication. Have a look at,
                for example, rclzip
                for a handler which uses rclexecm.py directly.
Most Python handlers which process
                single-document files by executing another command
                are further abstracted by using the rclexec1.py module. See for
                example rclrtf.py for
                a simple one, or rcldoc.py for a slightly more
                complicated one (possibly executing several
                commands).
Handlers which extract text from an XML document
                by using an XSLT style sheet are now executed
                inside recollindex, with
                only the style sheet stored in the filters/ directory. These can use
                a single style sheet (e.g. abiword.xsl), or two sheets for
                the data and metadata (e.g. opendoc-body.xsl and opendoc-meta.xsl). The
                mimeconf
                configuration file defines how the sheets are used,
                have a look. Before the C++ import, the xsl-based
                handlers used a common module rclgenxslt.py, it is still around
                but unused at the moment. The handler for OpenXML
                presentations is still the Python version because
                the format did not fit with what the C++ code does.
                It would be a good base for another similar
                issue.
There is a sample trivial handler based on
          rclexecm.py, with many
          comments, not actually used by Recoll. It would index a text file
          as one document per line. Look for rcltxtlines.py in the src/filters directory in the online
          Recoll Git repository (the sample not in the
          distributed release at the moment).
You can also have a look at the slightly more complex
          rclzip
          which uses Zip file paths as identifiers (ipath).
execm handlers sometimes
          need to make a choice for the nature of the ipath elements that they use in
          communication with the indexer. Here are a few
          guidelines:
Use ASCII or UTF-8 (if the identifier is an integer print it, for example, like printf %d would do).
If at all possible, the data should make some kind of sense when printed to a log file to help with debugging.
Recoll uses a
                colon (:) as a
                separator to store a complex path internally (for
                deeper embedding). Colons inside the ipath elements output by a handler
                will be escaped, but would be a bad choice as a
                handler-specific separator (mostly, again, for
                debugging issues).
In any case, the main goal is that it should be easy
          for the handler to extract the target document, given the
          file name and the ipath
          element.
execm handlers will also
          produce a document with a null ipath element. Depending on the type of
          document, this may have some associated data (e.g. the
          body of an email message), or none (typical for an
          archive file). If it is empty, this document will be
          useful anyway for some operations, as the parent of the
          actual data documents.
There are two elements that link a file to the handler which should process it: the association of file to MIME type and the association of a MIME type with a handler.
The association of files to MIME types is mostly based
          on name suffixes. The types are defined inside the
          mimemap file. Example:
            .doc = application/msword
          
          If no suffix association is found for the file name, Recoll will try to execute a system command (typically file -i or xdg-mime) to determine a MIME type.
The second element is the association of MIME types to
          handlers in the mimeconf file. A sample will
          probably be better than a long explanation:
          [index]
          application/msword = exec antiword -t -i 1 -m UTF-8;\
          mimetype = text/plain ; charset=utf-8
          application/ogg = exec rclogg
          text/rtf = exec unrtf --nopict --html; charset=iso-8859-1; mimetype=text/html
          application/x-chm = execm rclchm
        
          The fragment specifies that:
application/msword
                files are processed by executing the antiword program,
                which outputs text/plain encoded in utf-8.
application/ogg
                files are processed by the rclogg script,
                with default output type (text/html, with encoding specified
                in the header, or utf-8 by default).
text/rtf is
                processed by unrtf, which
                outputs text/html. The
                iso-8859-1 encoding is
                specified because it is not the utf-8 default, and not output by
                unrtf
                in the HTML header section.
application/x-chm
                is processed by a persistent handler. This is
                determined by the execm keyword.
Both the simple and persistent input handlers can return any MIME type to Recoll, which will further process the data according to the MIME configuration.
Most input filters filters produce either text/plain or text/html data. There are exceptions,
          for example, filters which process archive file
          (zip, tar, etc.) will usually return the
          documents as they are found, without processing them
          further.
There is nothing to say about text/plain output, except that its
          character encoding should be consistent with what is
          specified in the mimeconf
          file.
For filters producing HTML, the output could be very minimal like the following example:
          <html>
            <head>
              <meta http-equiv="Content-Type" content="text/html;charset=UTF-8"/>
            </head>
            <body>
              Some text content
            </body>
          </html>
          
          You should take care to escape some characters inside
          the text by transforming them into appropriate entities.
          At the very minimum, "&"
          should be transformed into "&", "<" should be transformed into
          "<". This is not
          always properly done by external helper programs which
          output HTML, and of course never by those which output
          plain text.
When encapsulating plain text in an HTML body, the
          display of a preview may be improved by enclosing the
          text inside <pre>
          tags.
The character set needs to be specified in the header. It does not need to be UTF-8 (Recoll will take care of translating it), but it must be accurate for good results.
Recoll will process
          meta tags inside the header
          as possible document fields candidates. Documents fields
          can be processed by the indexer in different ways, for
          searching or displaying inside query results. This is
          described in a following
          section.
By default, the indexer will process the standard
          header fields if they are present: title, meta/description, and meta/keywords are both indexed and
          stored for query-time display.
A predefined non-standard meta tag will also be processed by
          Recoll without further
          configuration: if a date tag
          is present and has the right format, it will be used as
          the document date (for display and sorting), in
          preference to the file modification date. The date format
          should be as follows:
          <meta name="date" content="YYYY-mm-dd HH:MM:SS">
          or
          <meta name="date" content="YYYY-mm-ddTHH:MM:SS">
        
          Example:
          <meta name="date" content="2013-02-24 17:50:00">
        
          Input handlers also have the possibility to "invent" field names. This should also be output as meta tags:
          <meta name="somefield" content="Some textual data" />
        
          You can embed HTML markup inside the content of custom
          fields, for improving the display inside result lists. In
          this case, add a (wildly non-standard) markup attribute to tell Recoll that the value is HTML and
          should not be escaped for display.
          <meta name="somefield" markup="html" content="Some <i>textual</i> data" />
        
          As written above, the processing of fields is described in a further section.
Persistent filters can use another, probably simpler,
          method to produce metadata, by calling the setfield() helper method. This avoids
          the necessity to produce HTML, and any issue with HTML
          quoting. See, for example, rclaudio in Recoll 1.23 and later for an example
          of handler which outputs text/plain and uses setfield() to produce metadata.
Fields are named pieces of
        information in or about documents, like title, author, abstract.
The field values for documents can appear in several
        ways during indexing: either output by input handlers as
        meta fields in the HTML header
        section, or extracted from file extended attributes, or
        added as attributes of the Doc
        object when using the API, or again synthetized internally
        by Recoll.
The Recoll query language allows searching for text in a specific field.
Recoll defines a number
        of default fields. Additional ones can be output by
        handlers, and described in the fields configuration file.
Fields can be:
indexed, meaning that
              their terms are separately stored in inverted lists
              (with a specific prefix), and that a field-specific
              search is possible.
stored, meaning that
              their value is recorded in the index data record for
              the document, and can be returned and displayed with
              search results.
A field can be either or both indexed and stored. This
        and other aspects of fields handling is defined inside the
        fields configuration
        file.
Some fields may also designated as supporting range queries, meaning that the results may be selected for an interval of its values. See the configuration section for more details.
The sequence of events for field processing is as follows:
During indexing, recollindex scans
              all meta fields in HTML
              documents (most document types are transformed into
              HTML at some point). It compares the name for each
              element to the configuration defining what should be
              done with fields (the fields file)
If the name for the meta element matches one for a field
              that should be indexed, the contents are processed
              and the terms are entered into the index with the
              prefix defined in the fields file.
If the name for the meta element matches one for a field
              that should be stored, the content of the element is
              stored with the document data record, from which it
              can be extracted and displayed at query time.
At query time, if a field search is performed, the index prefix is computed and the match is only performed against appropriately prefixed terms in the index.
At query time, the field can be displayed inside the result list by using the appropriate directive in the definition of the result list paragraph format. All fields are displayed on the fields screen of the preview window (which you can reach through the right-click menu). This is independent of the fact that the search which produced the results used the field or not.
You can find more information in the section about the
        fields file, or in
        comments inside the file.
You can also have a look at the example in the FAQs area, detailing how one could add a page count field to pdf documents for displaying inside result lists.
The Recoll Python programming interface can be used both for searching and for creating/updating an index. Bindings exist for Python2 and Python3 (Jan 2021: python2 support will be dropped soon).
The search interface is used in a number of active projects: the Recoll Gnome Shell Search Provider , the Recoll Web UI, and the upmpdcli UPnP Media Server, in addition to many small scripts.
The index update section of the API may be used to create and update Recoll indexes on specific configurations (separate from the ones created by recollindex). The resulting databases can be queried alone, or in conjunction with regular ones, through the GUI or any of the query interfaces.
The search API is modeled along the Python database API version 2.0 specification (early versions used the version 1.0 spec).
The recoll package
          contains two modules:
The recoll module
                contains functions and classes used to query (or
                update) the index.
The rclextract
                module contains functions and classes used at query
                time to access document data. The recoll module must be imported
                before rclextract
There is a good chance that your system repository has packages for the Recoll Python API, sometimes in a package separate from the main one (maybe named something like python-recoll). Else refer to the Building from source chapter.
As an introduction, the following small sample will
          run a query and list the title and url for each of the
          results. The python/samples
          source directory contains several examples of Python
          programming with Recoll,
          exercising the extension more completely, and especially
          its data extraction features.
#!/usr/bin/python3
from recoll import recoll
db = recoll.connect()
query = db.query()
nres = query.execute("some query")
results = query.fetchmany(20)
for doc in results:
    print("%s %s" % (doc.url, doc.title))
          You can also take a look at the source for the Recoll WebUI, the upmpdcli local media server, or the Gnome Shell Search Provider.
A few elements in the interface are specific and and need an explanation.
This data value (set as a field in the Doc
                object) is stored, along with the URL, but not
                indexed by Recoll.
                Its contents are not interpreted by the index
                layer, and its use is up to the application. For
                example, the Recoll file system indexer
                uses the ipath to
                store the part of the document access path internal
                to (possibly imbricated) container documents.
                ipath in this case is
                a vector of access elements (e.g, the first part
                could be a path inside a zip file to an archive
                member which happens to be an mbox file, the second
                element would be the message sequential number
                inside the mbox etc.). url and ipath are returned in every search
                result and define the access to the original
                document. ipath is
                empty for top-level document/files (e.g. a PDF
                document which is a filesystem file). The
                Recoll GUI knows
                about the structure of the ipath values used by the
                filesystem indexer, and uses it for such functions
                as opening the parent of a given document.
An udi (unique
                document identifier) identifies a document. Because
                of limitations inside the index engine, it is
                restricted in length (to 200 bytes), which is why a
                regular URI cannot be used. The structure and
                contents of the udi is
                defined by the application and opaque to the index
                engine. For example, the internal file system
                indexer uses the complete document path (file path
                + internal path), truncated to length, the
                suppressed part being replaced by a hash value. The
                udi is not explicit in
                the query interface (it is used "under the hood" by
                the rclextract
                module), but it is an explicit element of the
                update interface.
If this attribute is set on a document when
                entering it in the index, it designates its
                physical container document. In a multilevel
                hierarchy, this may not be the immediate parent.
                parent_udi is
                optional, but its use by an indexer may simplify
                index maintenance, as Recoll will automatically
                delete all children defined by parent_udi == udi when the
                document designated by udi is destroyed. e.g. if a
                Zip archive contains
                entries which are themselves containers, like
                mbox files, all the
                subdocuments inside the Zip file (mbox, messages, message
                attachments, etc.) would have the same parent_udi, matching the
                udi for the
                Zip file, and all
                would be destroyed when the Zip file (identified by its
                udi) is removed from
                the index. The standard filesystem indexer uses
                parent_udi.
The fields file inside the
                Recoll
                configuration defines which document fields are
                either indexed
                (searchable), stored
                (retrievable with search results), or both. Apart
                from a few standard/internal fields, only the
                stored fields are
                retrievable through the Python search
                interface.
Two specific configuration variables: pyloglevel and pylogfilename allow overriding the
          generic values for Python programs. Set pyloglevel to 2 to suppress default
          startup messages (printed at level 3).
The connect()
              function connects to one or several Recoll index(es) and returns a
              Db object.
This call initializes the recoll module, and it should always be performed before any other call or object creation.
confdir may
                    specify a configuration directory. The usual
                    defaults apply.
extra_dbs is a
                    list of additional indexes (Xapian
                    directories).
writable
                    decides if we can index new data through this
                    connection.
A Db object is created by a connect() call and holds a
              connection to a Recoll index.
Closes the connection. You can't do anything
                    with the Db object
                    after this.
These aliases return a blank Query object for this
                    index.
Set the parameters used to build snippets
                    (sets of keywords in context text fragments).
                    maxchars defines
                    the maximum total size of the abstract.
                    contextwords
                    defines how many terms are shown around the
                    keyword.
Expand an expression against the index term
                    list. Performs the basic function from the GUI
                    term explorer tool. match_type can be either of
                    wildcard,
                    regexp or
                    stem. Returns a
                    list of terms expanded from the input
                    expression.
A Query object
              (equivalent to a cursor in the Python DB API) is
              created by a Db.query()
              call. It is used to execute index searches.
Sort results by fieldname, in
                    ascending or descending order. Must be called
                    before executing the search.
Starts a search for query_string, a
                    Recoll search
                    language string. If the index stores the
                    document texts and fetchtext is True, store the
                    document extracted text in doc.text.
Starts a search for the query defined by the
                    SearchData object. If the index stores the
                    document texts and fetchtext is True, store the
                    document extracted text in doc.text.
Fetches the next Doc objects in the current
                    search results, and returns them as an array of
                    the required size, which is by default the
                    value of the arraysize data member.
Fetches the next Doc object from the current
                    search results. Generates a StopIteration
                    exception if there are no results left.
Closes the query. The object is unusable after the call.
Adjusts the position in the current result
                    set. mode can be
                    relative or
                    absolute.
Retrieves the expanded query terms as a list of pairs. Meaningful only after executexx In each pair, the first entry is a list of user terms (of size one for simple terms, or more for group and phrase clauses), the second a list of query terms as derived from the user terms and used in the Xapian Query.
Return the Xapian query description as a Unicode string. Meaningful only after executexx.
Will insert <span "class=rclmatch">,
                    </span> tags around the match areas in
                    the input text and return the modified text.
                    ishtml can be set
                    to indicate that the input text is HTML and
                    that HTML special characters should not be
                    escaped. methods
                    if set should be an object with methods
                    startMatch(i) and endMatch() which will be
                    called for each match and should return a begin
                    and end tag
Create a snippets abstract for doc (a Doc object) by selecting text
                    around the match terms. If methods is set, will
                    also perform highlighting. See the highlight
                    method.
Will return a list of extracts from the
                    result document by selecting text around the
                    match terms. Each entry in the result list is a
                    triple: page number, term, text. By default,
                    the most relevants snippets appear first in the
                    list. Set sortbypage to sort by page
                    number instead. If methods is set, the fragments
                    will be highlighted (see the highlight method).
                    If maxoccs is set,
                    it defines the maximum result list length.
                    ctxwords allows
                    adjusting the individual snippet context
                    size.
So that things like for doc in query: will
                    work.
Default number of records processed by fetchmany (r/w).
Number of records returned by the last execute.
Next index to be fetched from results.
                    Normally increments after each fetchone() call,
                    but can be set/reset before the call to effect
                    seeking (equivalent to using scroll()). Starts at 0.
A Doc object contains
              index data for a given document. The data is
              extracted from the index when searching, or set by
              the indexer program when updating. The Doc object has
              many attributes to be read or set by its user. It
              mostly matches the Rcl::Doc C++ object. Some of the
              attributes are predefined, but, especially when
              indexing, others can be set, the name of which will
              be processed as field names by the indexing
              configuration. Inputs can be specified as Unicode or
              strings. Outputs are Unicode objects. All dates are
              specified as Unix timestamps, printed as strings.
              Please refer to the rcldb/rcldoc.cpp C++ file for a
              full description of the predefined attributes. Here
              follows a short list.
url the
                    document URL but see also getbinurl()
ipath the
                    document ipath for
                    embedded documents.
fbytes, dbytes
                    the document file and text sizes.
fmtime, dmtime
                    the document file and document times.
xdocid the
                    document Xapian document ID. This is useful if
                    you want to access the document through a
                    direct Xapian operation.
mtype the
                    document MIME type.
Fields stored by default: author, filename, keywords, recipient
At query time, only the fields that are defined as
              stored either by default
              or in the fields
              configuration file will be meaningful in the
              Doc object. The document
              processed text may be present or not, depending if
              the index stores the text at all, and if it does, on
              the fetchtext query
              execute option. See also the rclextract module for accessing
              document contents.
Retrieve the named document attribute. You
                    can also use getattr(doc,
                    key) or doc.key.
Set the the named document attribute. You
                    can also use setattr(doc,
                    key, value).
Retrieve the URL in byte array format (no transcoding), for use as parameter to a system call.
Set the URL in byte array format (no transcoding).
Return a dictionary of doc object keys/values
list of doc object keys (attribute names).
A SearchData object
              allows building a query by combining clauses, for
              execution by Query.executesd(). It can be used in
              replacement of the query language approach. The
              interface is going to change a little, so no detailed
              doc for now...
Prior to Recoll
            1.25, index queries could not provide document content
            because it was never stored. Recoll 1.25 and later usually
            store the document text, which can be optionally
            retrieved when running a query (see query.execute() above - the result is
            always plain text).
The rclextract module
            can give access to the original document and to the
            document text content (if not stored by the index, or
            to access an HTML version of the text). Accessing the
            original document is particularly useful if it is
            embedded (e.g. an email attachment).
You need to import the recoll module before the rclextract module.
An Extractor
                    object is built from a Doc object, output from a
                    query.
Extract document defined by ipath and
                    return a Doc
                    object. The doc.text field has the
                    document text converted to either text/plain or
                    text/html according to doc.mimetype. The typical use
                    would be as follows:
from recoll import recoll, rclextract qdoc = query.fetchone() extractor = recoll.Extractor(qdoc) doc = extractor.textextract(qdoc.ipath) # use doc.text, e.g. for previewing
Passing qdoc.ipath to textextract() is redundant,
                    but reflects the fact that the Extractor object actually has
                    the capability to access the other entries in a
                    compound document.
Extracts document into an output file, which can be given explicitly or will be created as a temporary file to be deleted by the caller. Typical use:
from recoll import recoll, rclextract qdoc = query.fetchone() extractor = recoll.Extractor(qdoc) filename = extractor.idoctofile(qdoc.ipath, qdoc.mimetype)
In all cases the output is a copy, even if the requested document is a regular system file, which may be wasteful in some cases. If you want to avoid this, you can test for a simple file document as follows:
not doc.ipath and (not "rclbes" in doc.keys() or doc["rclbes"] == "FS")
The following sample would query the index with a
            user language string. See the python/samples directory inside the
            Recoll source for
            other examples. The recollgui subdirectory has a very
            embryonic GUI which demonstrates the highlighting and
            data extraction functions.
#!/usr/bin/python3
from recoll import recoll
db = recoll.connect()
db.setAbstractParams(maxchars=80, contextwords=4)
query = db.query()
nres = query.execute("some user question")
print("Result count: %d" % nres)
if nres > 5:
    nres = 5
for i in range(nres):
    doc = query.fetchone()
    print("Result #%d" % (query.rownumber))
    for k in ("title", "size"):
        print("%s : %s" % (k, getattr(doc, k)))
    print("%s\n" % db.makeDocAbstract(doc, query))
          The update API can be used to create an index from data which is not accessible to the regular Recoll indexer, or structured to present difficulties to the Recoll input handlers.
An indexer created using this API will be have equivalent work to do as the the Recoll file system indexer: look for modified documents, extract their text, call the API for indexing it, take care of purging the index out of data from documents which do not exist in the document store any more.
The data for such an external indexer should be stored in an index separate from any used by the Recoll internal file system indexer. The reason is that the main document indexer purge pass (removal of deleted documents) would also remove all the documents belonging to the external indexer, as they were not seen during the filesystem walk. The main indexer documents would also probably be a problem for the external indexer own purge operation.
While there would be ways to enable multiple foreign indexers to cooperate on a single index, it is just simpler to use separate ones, and use the multiple index access capabilities of the query interface, if needed.
There are two parts in the update interface:
Methods inside the recoll module allow inserting
                data into the index, to make it accessible by the
                normal query interface.
An interface based on scripts execution is
                defined to allow either the GUI or the rclextract module to access
                original document data for previewing or
                editing.
The update methods are part of the recoll module described above. The
            connect() method is used with a writable=true parameter to obtain a
            writable Db object. The
            following Db object
            methods are then available.
Add or update index data for a given document
                  The udi
                  string must define a unique id for the document.
                  It is an opaque interface element and not
                  interpreted inside Recoll. doc is a Doc object,
                  created from the data to be indexed (the main
                  text should be in doc.text). If parent_udi
                  is set, this is a unique identifier for the
                  top-level container (e.g. for the filesystem
                  indexer, this would be the one which is an actual
                  file).
Purge index from all data for udi, and all documents (if any)
                  which have a matrching parent_udi.
Test if the index needs to be updated for the
                  document identified by udi. If this call is to be used,
                  the doc.sig field
                  should contain a signature value when calling
                  addOrUpdate(). The
                  needUpdate() call
                  then compares its parameter value with the stored
                  sig for udi. sig is an opaque value, compared
                  as a string.
The filesystem indexer uses a concatenation of the decimal string values for file size and update time, but a hash of the contents could also be used.
As a side effect, if the return value is false
                  (the index is up to date), the call will set the
                  existence flag for the document (and any
                  subdocument defined by its parent_udi), so that a later
                  purge() call will
                  preserve them).
The use of needUpdate() and purge() is optional, and the
                  indexer may use another method for checking the
                  need to reindex or to delete stale entries.
Delete all documents that were not touched during the just finished indexing pass (since open-for-write). These are the documents for the needUpdate() call was not performed, indicating that they no longer exist in the primary storage system.
Recoll has internal
            methods to access document data for its internal
            (filesystem) indexer. An external indexer needs to
            provide data access methods if it needs integration
            with the GUI (e.g. preview function), or support for
            the rclextract
            module.
The index data and the access method are linked by
            the rclbes (recoll backend
            storage) Doc field. You
            should set this to a short string value identifying
            your indexer (e.g. the filesystem indexer uses either
            "FS" or an empty value, the Web history indexer uses
            "BGL").
The link is actually performed inside a backends configuration file (stored
            in the configuration directory). This defines commands
            to execute to access data from the specified indexer.
            Example, for the mbox indexing sample found in the
            Recoll source (which sets rclbes="MBOX"):
[MBOX] fetch = /path/to/recoll/src/python/samples/rclmbox.py fetch makesig = path/to/recoll/src/python/samples/rclmbox.py makesig
fetch and makesig define two commands to execute
            to respectively retrieve the document text and compute
            the document signature (the example implementation uses
            the same script with different first parameters to
            perform both operations).
The scripts are called with three additional
            arguments: udi,
            url, ipath, stored with the document when
            it was indexed, and may use any or all to perform the
            requested operation. The caller expects the result data
            on stdout.
The Recoll source tree has two samples of external
            indexers in the src/python/samples directory. The
            more interesting one is rclmbox.py which indexes a directory
            containing mbox folder
            files. It exercises most features in the update
            interface, and has a data access interface.
See the comments inside the file for more information.
The following code fragments can be used to ensure that code can run with both the old and the new API (as long as it does not use the new abilities of the new API of course).
Adapting to the new package structure:
try: from recoll import recoll from recoll import rclextract hasextract = True except: import recoll hasextract = False
Adapting to the change of nature of the next Query
          member. The same test can be used to choose to use the
          scroll() method (new) or set
          the next value (old).
rownum = query.next if type(query.next) == int else query.rownumber
Recoll binary copies are always distributed as regular packages for your system. They can be obtained either through the system's normal software distribution framework (e.g. Debian/Ubuntu apt, FreeBSD ports, etc.), or from some type of "backports" repository providing versions newer than the standard ones, or found on the Recoll Web site in some cases. The most up-to-date information about Recoll packages can usually be found on the Recoll Web site downloads page
The Windows version of Recoll comes in a self-contained setup file, there is nothing else to install.
On Unix-like systems, the package management tools will automatically install hard dependencies for packages obtained from a proper package repository. You will have to deal with them by hand for downloaded packages (for example, when dpkg complains about missing dependencies).
In all cases, you will have to check or install supporting applications for the file types that you want to index beyond those that are natively processed by Recoll (text, HTML, email files, and a few others).
You should also maybe have a look at the configuration section (but this may not be necessary for a quick test with default parameters). Most parameters can be more conveniently set from the GUI interface.
The Windows installation of Recoll is self-contained. Windows users can skip this section.
Recoll uses external applications to index some file types. You need to install them for the file types that you wish to have indexed (these are run-time optional dependencies. None is needed for building or running Recoll except for indexing their specific file type).
After an indexing pass, the commands that were found
        missing can be displayed from the recoll File menu. The list is stored in the
        missing text file inside the
        configuration directory.
The past has proven that I was unable to maintain an up to date application list in this manual. Please check http://www.recoll.org/pages/features.html for a complete list along with links to the home pages or best source/patches pages, and misc tips. What follows is only a very short extract of the stable essentials.
PDF files need pdftotext which is
              part of Poppler
              (usually comes with the poppler-utils package). Avoid the
              original one from Xpdf.
MS Word documents need antiword. It is also useful to have wvWare installed as it may be be used as a fallback for some files which antiword does not handle.
RTF files need unrtf, which, in its older versions, has much trouble with non-western character sets. Many Linux distributions carry outdated unrtf versions. Check http://www.recoll.org/pages/features.html for details.
Pictures: Recoll uses the Exiftool Perl package to extract tag information. Most image file formats are supported.
Up to Recoll 1.24, many XML-based formats need the xsltproc command, which usually comes with libxslt. These are: abiword, fb2 ebooks, kword, openoffice, opendocument svg. Recoll 1.25 and later process them internally (using libxslt).
The following prerequisites are described in broad terms and not as specific package names (which will depend on the exact platform). The dependencies should be available as packages on most common Unix derivatives, and it should be quite uncommon that you would have to build one of them.
If you do not need the GUI, you can avoid all GUI dependencies by disabling its build. (See the configure section further).
The shopping list:
If you start from git code, you will need the autoconf, automake and libtool triad. They are not needed for building from tar distributions.
C++ compiler. Recent versions require C++11 compatibility (1.23 and later).
bison command (for Recoll 1.21 and later).
For building the documentation: the xsltproc command,
                and the Docbook XML and style sheet files. You can
                avoid this dependency by disabling documentation
                building with the --disable-userdoc configure
                option.
Development files for Xapian core.
If you are building Xapian for an older CPU
                  (before Pentium 4 or Athlon 64), you need to add
                  the --disable-sse
                  flag to the configure command. Else all Xapian
                  application will crash with an illegal instruction error.
Development files for Qt 5 . and its own dependencies (X11 etc.)
Development files for libxslt
Development files for zlib.
Development files for Python (or use --disable-python-module).
Development files for libchm
You may also need libiconv. On Linux systems, the iconv interface is part of libc and you should not need to do anything special.
Check the Recoll download page for up to date version information.
Recoll has been built on Linux, FreeBSD, Mac OS X, and Solaris, most versions after 2005 should be ok, maybe some older ones too (Solaris 8 used to be ok). If you build on another system, and need to modify things, I would very much welcome patches.
--without-aspell will
            disable the code for phonetic matching of search
            terms.
--with-fam or
            --with-inotify will enable
            the code for real time indexing. Inotify support is
            enabled by default on Linux systems.
--with-qzeitgeist will
            enable sending Zeitgeist events about the visited
            search results, and needs the qzeitgeist package.
--disable-qtgui will
            disable the Qt graphical interface, which allows
            building the indexer and the command line search
            program in absence of a Qt environment.
--disable-webkit will
            implement the result list with a Qt QTextBrowser instead of a
            WebKit widget if you do not or can't depend on the
            latter.
--enable-webengine will
            enable the use of Qt Webengine (only meaningful if the
            Qt GUI is enabled), in place or Qt Webkit.
--enable-guidebug will
            build the recoll GUI program with debug symbols. This
            makes it very big (~50MB), which is why it is stripped
            by default.
--disable-idxthreads is
            available from version 1.19 to suppress multithreading
            inside the indexing process. You can also use the
            run-time configuration to restrict recollindex to using
            a single thread, but the compile-time option may
            disable a few more unused locks. This only applies to
            the use of multithreading for the core index processing
            (data input). The Recoll monitor mode always uses at
            least two threads of execution.
--disable-python-module
            will avoid building the Python module.
--disable-python-chm
            will avoid building the Python libchm interface used to
            index CHM files.
--enable-camelcase will
            enable splitting camelCase words. This
            is not enabled by default as it has the unfortunate
            side-effect of making some phrase searches quite
            confusing: ie, "MySQL
            manual" would be matched by "MySQL manual" and "my sql manual" but not "mysql manual" (only inside phrase
            searches).
--with-file-command
            Specify the version of the 'file' command to use (ie:
            --with-file-command=/usr/local/bin/file). Can be useful
            to enable the gnu version on systems where the native
            one is bad.
--disable-x11mon Disable
            X11 connection
            monitoring inside recollindex. Together with
            --disable-qtgui, this allows building recoll without
            Qt and X11.
--disable-userdoc will
            avoid building the user manual. This avoids having to
            install the Docbook XML/XSL files and the TeX toolchain
            used for translating the manual to PDF.
--enable-recollq Enable
            building the recollq command line
            query tool (recoll -t without need for Qt). This is
            done by default if --disable-qtgui is set but this
            option enables forcing it.
--disable-pic
            (Recoll versions up to
            1.21 only) will compile Recoll with position-dependant
            code. This is incompatible with building the KIO or the
            Python or PHP extensions, but might yield
            very marginally faster code.
--without-systemd
            Disable the automatic installation of systemd unit
            files. Normally unit files are installed if the install
            path can be detected.
--with-system-unit-dir=DIR Provide an
            install path for the systemd system unit template
            file.
--with-user-unit-dir=DIR
            Provide an install path for the systemd user unit
            file.
Of course the usual autoconf configure options,
            like --prefix apply.
cd recoll-xxx./configure[options]make(practices usual hardship-repelling invocations)
Use make
          install in the root of the source tree.
          This will copy the commands to prefix/binprefix/share/recoll
The Python interface can be found in the source tree,
          under the python/recoll
          directory.
As of Recoll 1.19, the module can be compiled for Python3.
The normal Recoll build procedure (see above) installs the API package for the default system version (python) along with the main code. The package for other Python versions (e.g. python3 if the system default is python2) must be explicitly built and installed.
The python/recoll/
          directory contains the usual setup.py. After configuring and
          building the main Recoll
          code, you can use the script to build and install the
          Python module:
          cd recoll-xxx/python/recoll
          pythonX setup.py build
          sudo pythonX setup.py install
        
        We did not test building the GUI on Solaris for recent versions. You will need at least Qt 4.4. There are some hints on an old web site page, they may still be valid.
Someone did test the 1.19 indexer and Python module build, they do work, with a few minor glitches. Be sure to use GNU make and install.
Most of the parameters specific to the recoll GUI are set
        through the Preferences menu
        and stored in the standard Qt place ($HOME/.config/Recoll.org/recoll.conf).
        You probably do not want to edit this by hand.
Recoll indexing options are set inside text configuration files located in a configuration directory. There can be several such directories, each of which defines the parameters for one index.
The configuration files can be edited by hand or through the Index configuration dialog (Preferences menu). The GUI tool will try to respect your formatting and comments as much as possible, so it is quite possible to use both approaches on the same configuration.
The most accurate documentation for the configuration parameters is given by comments inside the default files, and we will just give a general overview here.
For each index, there are at least two sets of
        configuration files. System-wide configuration files are
        kept in a directory named like /usr/share/recoll/examples, and define
        default values, shared by all indexes. For each index, a
        parallel set of files defines the customized
        parameters.
The default location of the customized configuration is
        the .recoll directory in your
        home. Most people will only use this directory.
This location can be changed, or others can be added
        with the RECOLL_CONFDIR
        environment variable or the -c
        option parameter to recoll and recollindex.
In addition (as of Recoll version 1.19.7), it is possible
        to specify two additional configuration directories which
        will be stacked before and after the user configuration
        directory. These are defined by the RECOLL_CONFTOP and RECOLL_CONFMID environment variables. Values
        from configuration files inside the top directory will
        override user ones, values from configuration files inside
        the middle directory will override system ones and be
        overridden by user ones. These two variables may be of use
        to applications which augment Recoll functionality, and need to add
        configuration data without disturbing the user's files.
        Please note that the two, currently single, values will
        probably be interpreted as colon-separated lists in the
        future: do not use colon characters inside the directory
        paths.
If the .recoll directory
        does not exist when recoll or recollindex are started,
        it will be created with a set of empty configuration files.
        recoll will
        give you a chance to edit the configuration file before
        starting indexing. recollindex will proceed
        immediately. To avoid mistakes, the automatic directory
        creation will only occur for the default location, not if
        -c or RECOLL_CONFDIR were used (in the latter
        cases, you will have to create the directory).
All configuration files share the same format. For example, a short extract of the main configuration file might look as follows:
        # Space-separated list of files and directories to index.
        topdirs =  ~/docs /usr/share/doc
        [~/somedirectory-with-utf8-txt-files]
        defaultcharset = utf-8
      
        There are three kinds of lines:
Comment (starts with #) or empty.
Parameter affectation (name = value).
Section definition ([somedirname]).
Long lines can be broken by ending each incomplete part
        with a backslash (\).
Depending on the type of configuration file, section definitions either separate groups of parameters or allow redefining some parameters for a directory sub-tree. They stay in effect until another section definition, or the end of file, is encountered. Some of the parameters used for indexing are looked up hierarchically from the current directory location upwards. Not all parameters can be meaningfully redefined, this is specified for each in the next section.
Global parameters must
          not be defined in a directory subsection,
          else they will not be found at all by the Recoll code, which looks for them at
          the top level (e.g. skippedPaths).
When found at the beginning of a file path, the tilde character (~) is expanded to the name of the user's home directory, as a shell would do.
Some parameters are lists of strings. White space is used for separation. List elements with embedded spaces can be quoted using double-quotes. Double quotes inside these elements can be escaped with a backslash.
No value inside a configuration file can contain a newline character. Long lines can be continued by escaping the physical newline with backslash, even inside quoted strings.
        astringlist =  "some string \
        with spaces"
        thesame = "some string with spaces"        
      
        Parameters which are not part of string lists can't be quoted, and leading and trailing space characters are stripped before the value is used.
Encoding issues. Most of the configuration parameters are plain ASCII. Two particular sets of values may cause encoding issues:
File path parameters may contain non-ascii characters and should use the exact same byte values as found in the file system directory. Usually, this means that the configuration file should use the system default locale encoding.
The unac_except_trans
              parameter should be encoded in UTF-8. If your system
              locale is not UTF-8, and you need to also specify
              non-ascii file paths, this poses a difficulty because
              common text editors cannot handle multiple encodings
              in a single file. In this relatively unlikely case,
              you can edit the configuration file as two separate
              text files with appropriate encodings, and
              concatenate them to create the complete
              configuration.
RECOLL_CONFDIRDefines the main configuration directory.
RECOLL_TMPDIR, TMPDIRLocations for temporary files, in this order of
                priority. The default if none of these is set is to
                use /tmp. Big
                temporary files may be created during indexing,
                mostly for decompressing, and also for processing,
                e.g. email attachments.
RECOLL_CONFTOP,
              RECOLL_CONFMIDAllow adding configuration directories with priorities below and above the user directory (see above the Configuration overview section for details).
RECOLL_EXTRA_DBS,
              RECOLL_ACTIVE_EXTRA_DBSHelp for setting up external indexes. See this paragraph for explanations.
RECOLL_DATADIRDefines replacement for the default location of
                Recoll data files, normally found in, e.g.,
                /usr/share/recoll).
RECOLL_FILTERSDIRDefines replacement for the default location of
                Recoll filters, normally found in, e.g.,
                /usr/share/recoll/filters).
ASPELL_PROGaspell program to
                use for creating the spelling dictionary. The
                result has to be compatible with the libaspell which Recoll is using.
topdirsSpace-separated list of files or directories to recursively index. Default to ~ (indexes $HOME). You can use symbolic links in the list, they will be followed, independently of the value of the followLinks variable.
monitordirsSpace-separated list of files or directories to monitor for updates. When running the real-time indexer, this allows monitoring only a subset of the whole indexed area. The elements must be included in the tree defined by the 'topdirs' members.
skippedNamesFiles and directories which should be ignored. White space separated list of wildcard patterns (simple ones, not paths, must contain no '/' characters), which will be tested against file and directory names.
Have a look at the default configuration for the initial value, some entries may not suit your situation. The easiest way to see it is through the GUI Index configuration "local parameters" panel.
The list in the default configuration does not exclude hidden directories (names beginning with a dot), which means that it may index quite a few things that you do not want. On the other hand, email user agents like Thunderbird usually store messages in hidden directories, and you probably want this indexed. One possible solution is to have ".*" in "skippedNames", and add things like "~/.thunderbird" "~/.evolution" to "topdirs".
Not even the file names are indexed for patterns in this list, see the "noContentSuffixes" variable for an alternative approach which indexes the file names. Can be redefined for any subtree.
skippedNames-List of name endings to remove from the default skippedNames list.
skippedNames+List of name endings to add to the default skippedNames list.
onlyNamesRegular file name filter patterns If this is set, only the file names not in skippedNames and matching one of the patterns will be considered for indexing. Can be redefined per subtree. Does not apply to directories.
noContentSuffixesList of name endings (not necessarily dot-separated suffixes) for which we don't try MIME type identification, and don't uncompress or index content. Only the names will be indexed. This complements the now obsoleted recoll_noindex list from the mimemap file, which will go away in a future release (the move from mimemap to recoll.conf allows editing the list through the GUI). This is different from skippedNames because these are name ending matches only (not wildcard patterns), and the file name itself gets indexed normally. This can be redefined for subdirectories.
noContentSuffixes-List of name endings to remove from the default noContentSuffixes list.
noContentSuffixes+List of name endings to add to the default noContentSuffixes list.
skippedPathsAbsolute paths we should not go into. Space-separated list of wildcard expressions for absolute filesystem paths (for files or directories). The variable must be defined at the top level of the configuration file, not in a subsection.
Any value in the list must be textually consistent with the values in topdirs, no attempts are made to resolve symbolic links. In practise, if, as is frequently the case, /home is a link to /usr/home, your default topdirs will have a single entry '~' which will be translated to '/home/yourlogin'. In this case, any skippedPaths entry should start with '/home/yourlogin' *not* with '/usr/home/yourlogin'.
The index and configuration directories will automatically be added to the list.
The expressions are matched using 'fnmatch(3)' with the FNM_PATHNAME flag set by default. This means that '/' characters must be matched explicitly. You can set 'skippedPathsFnmPathname' to 0 to disable the use of FNM_PATHNAME (meaning that '/*/dir3' will match '/dir1/dir2/dir3').
The default value contains the usual mount point for removable media to remind you that it is in most cases a bad idea to have Recoll work on these Explicitly adding '/media/xxx' to the 'topdirs' variable will override this.
skippedPathsFnmPathnameSet to 0 to override use of FNM_PATHNAME for matching skipped paths.
nowalkfnFile name which will cause its parent directory to be skipped. Any directory containing a file with this name will be skipped as if it was part of the skippedPaths list. Ex: .recoll-noindex
daemSkippedPathsskippedPaths equivalent specific to real time indexing. This enables having parts of the tree which are initially indexed but not monitored. If daemSkippedPaths is not set, the daemon uses skippedPaths.
zipUseSkippedNamesUse skippedNames inside Zip archives. Fetched directly by the rclzip handler. Skip the patterns defined by skippedNames inside Zip archives. Can be redefined for subdirectories. See https://www.lesbonscomptes.com/recoll/faqsandhowtos/FilteringOutZipArchiveMembers.html
zipSkippedNamesSpace-separated list of wildcard expressions for names that should be ignored inside zip archives. This is used directly by the zip handler. If zipUseSkippedNames is not set, zipSkippedNames defines the patterns to be skipped inside archives. If zipUseSkippedNames is set, the two lists are concatenated and used. Can be redefined for subdirectories. See https://www.lesbonscomptes.com/recoll/faqsandhowtos/FilteringOutZipArchiveMembers.html
followLinksFollow symbolic links during indexing. The default is to ignore symbolic links to avoid multiple indexing of linked files. No effort is made to avoid duplication when this option is set to true. This option can be set individually for each of the 'topdirs' members by using sections. It can not be changed below the 'topdirs' level. Links in the 'topdirs' list itself are always followed.
indexedmimetypesRestrictive list of indexed mime types. Normally not set (in which case all supported types are indexed). If it is set, only the types from the list will have their contents indexed. The names will be indexed anyway if indexallfilenames is set (default). MIME type names should be taken from the mimemap file (the values may be different from xdg-mime or file -i output in some cases). Can be redefined for subtrees.
excludedmimetypesList of excluded MIME types. Lets you exclude some types from indexing. MIME type names should be taken from the mimemap file (the values may be different from xdg-mime or file -i output in some cases) Can be redefined for subtrees.
nomd5typesDon't compute md5 for these types. md5 checksums are used only for deduplicating results, and can be very expensive to compute on multimedia or other big files. This list lets you turn off md5 computation for selected types. It is global (no redefinition for subtrees). At the moment, it only has an effect for external handlers (exec and execm). The file types can be specified by listing either MIME types (e.g. audio/mpeg) or handler names (e.g. rclaudio).
compressedfilemaxkbsSize limit for compressed files. We need to decompress these in a temporary directory for identification, which can be wasteful in some cases. Limit the waste. Negative means no limit. 0 results in no processing of any compressed file. Default 100 MB.
textfilemaxmbsSize limit for text files. Mostly for skipping monster logs. Default 20 MB. Use a value of -1 to disable.
indexallfilenamesIndex the file names of unprocessed files Index the names of files the contents of which we don't index because of an excluded or unsupported MIME type.
usesystemfilecommandUse a system command for file MIME type guessing as a final step in file type identification This is generally useful, but will usually cause the indexing of many bogus 'text' files. See 'systemfilecommand' for the command used.
systemfilecommandCommand used to guess MIME types if the internal methods fails This should be a "file -i" workalike. The file path will be added as a last parameter to the command line. "xdg-mime" works better than the traditional "file" command, and is now the configured default (with a hard-coded fallback to "file")
processwebqueueDecide if we process the Web queue. The queue is a directory where the Recoll Web browser plugins create the copies of visited pages.
textfilepagekbsPage size for text files. If this is set, text/plain files will be divided into documents of approximately this size. Will reduce memory usage at index time and help with loading data in the preview window at query time. Particularly useful with very big files, such as application or system logs. Also see textfilemaxmbs and compressedfilemaxkbs.
membermaxkbsSize limit for archive members. This is passed to the filters in the environment as RECOLL_FILTER_MAXMEMBERKB.
indexStripCharsDecide if we store character case and diacritics in the index. If we do, searches sensitive to case and diacritics can be performed, but the index will be bigger, and some marginal weirdness may sometimes occur. The default is a stripped index. When using multiple indexes for a search, this parameter must be defined identically for all. Changing the value implies an index reset.
indexStoreDocTextDecide if we store the documents' text content in the index. Storing the text allows extracting snippets from it at query time, instead of building them from index position data.
Newer Xapian index formats have rendered our use of positions list unacceptably slow in some cases. The last Xapian index format with good performance for the old method is Chert, which is default for 1.2, still supported but not default in 1.4 and will be dropped in 1.6.
The stored document text is translated from its original format to UTF-8 plain text, but not stripped of upper-case, diacritics, or punctuation signs. Storing it increases the index size by 10-20% typically, but also allows for nicer snippets, so it may be worth enabling it even if not strictly needed for performance if you can afford the space.
The variable only has an effect when creating an index, meaning that the xapiandb directory must not exist yet. Its exact effect depends on the Xapian version.
For Xapian 1.4, if the variable is set to 0, the Chert format will be used, and the text will not be stored. If the variable is 1, Glass will be used, and the text stored.
For Xapian 1.2, and for versions after 1.5 and newer, the index format is always the default, but the variable controls if the text is stored or not, and the abstract generation method. With Xapian 1.5 and later, and the variable set to 0, abstract generation may be very slow, but this setting may still be useful to save space if you do not use abstract generation at all.
nonumbersDecides if terms will be generated for numbers. For example "123", "1.5e6", 192.168.1.4, would not be indexed if nonumbers is set ("value123" would still be). Numbers are often quite interesting to search for, and this should probably not be set except for special situations, ie, scientific documents with huge amounts of numbers in them, where setting nonumbers will reduce the index size. This can only be set for a whole index, not for a subtree.
dehyphenateDetermines if we index 'coworker' also when the input is 'co-worker'. This is new in version 1.22, and on by default. Setting the variable to off allows restoring the previous behaviour.
backslashasletterProcess backslash as normal letter. This may make sense for people wanting to index TeX commands as such but is not of much general use.
underscoreasletterProcess underscore as normal letter. This makes sense in so many cases that one wonders if it should not be the default.
maxtermlengthMaximum term length. Words longer than this will be discarded. The default is 40 and used to be hard-coded, but it can now be adjusted. You need an index reset if you change the value.
nocjkDecides if specific East Asian (Chinese Korean Japanese) characters/word splitting is turned off. This will save a small amount of CPU if you have no CJK documents. If your document base does include such text but you are not interested in searching it, setting nocjk may be a significant time and space saver.
cjkngramlenThis lets you adjust the size of n-grams used for indexing CJK text. The default value of 2 is probably appropriate in most cases. A value of 3 would allow more precision and efficiency on longer words, but the index will be approximately twice as large.
indexstemminglanguagesLanguages for which to create stemming expansion data. Stemmer names can be found by executing 'recollindex -l', or this can also be set from a list in the GUI. The values are full language names, e.g. english, french...
defaultcharsetDefault character set. This is used for files which do not contain a character set definition (e.g.: text/plain). Values found inside files, e.g. a 'charset' tag in HTML documents, will override it. If this is not set, the default character set is the one defined by the NLS environment ($LC_ALL, $LC_CTYPE, $LANG), or ultimately iso-8859-1 (cp-1252 in fact). If for some reason you want a general default which does not match your LANG and is not 8859-1, use this variable. This can be redefined for any sub-directory.
unac_except_transA list of characters, encoded in UTF-8, which should be handled specially when converting text to unaccented lowercase. For example, in Swedish, the letter a with diaeresis has full alphabet citizenship and should not be turned into an a. Each element in the space-separated list has the special character as first element and the translation following. The handling of both the lowercase and upper-case versions of a character should be specified, as appartenance to the list will turn-off both standard accent and case processing. The value is global and affects both indexing and querying. We also convert a few confusing Unicode characters (quotes, hyphen) to their ASCII equivalent to avoid "invisible" search failures.
Examples: Swedish: unac_except_trans = ää Ää öö Öö üü Üü ßss œoe Œoe æae Æae ffff fifi flfl åå Åå ’' ❜' ʼ' ‐- . German: unac_except_trans = ää Ää öö Öö üü Üü ßss œoe Œoe æae Æae ffff fifi flfl ’' ❜' ʼ' ‐- . French: you probably want to decompose oe and ae and nobody would type a German ß unac_except_trans = ßss œoe Œoe æae Æae ffff fifi flfl ’' ❜' ʼ' ‐- . The default for all until someone protests follows. These decompositions are not performed by unac, but it is unlikely that someone would type the composed forms in a search. unac_except_trans = ßss œoe Œoe æae Æae ffff fifi flfl ’' ❜' ʼ' ‐-
maildefcharsetOverrides the default character set for email messages which don't specify one. This is mainly useful for readpst (libpst) dumps, which are utf-8 but do not say so.
localfieldsSet fields on all files (usually of a specific fs area). Syntax is the usual: name = value ; attr1 = val1 ; [...] value is empty so this needs an initial semi-colon. This is useful, e.g., for setting the rclaptg field for application selection inside mimeview.
testmodifusemtimeUse mtime instead of ctime to test if a file has been modified. The time is used in addition to the size, which is always used. Setting this can reduce re-indexing on systems where extended attributes are used (by some other application), but not indexed, because changing extended attributes only affects ctime. Notes: - This may prevent detection of change in some marginal file rename cases (the target would need to have the same size and mtime). - You should probably also set noxattrfields to 1 in this case, except if you still prefer to perform xattr indexing, for example if the local file update pattern makes it of value (as in general, there is a risk for pure extended attributes updates without file modification to go undetected). Perform a full index reset after changing this.
noxattrfieldsDisable extended attributes conversion to metadata fields. This probably needs to be set if testmodifusemtime is set.
metadatacmdsDefine commands to gather external metadata, e.g. tmsu tags. There can be several entries, separated by semi-colons, each defining which field name the data goes into and the command to use. Don't forget the initial semi-colon. All the field names must be different. You can use aliases in the "field" file if necessary. As a not too pretty hack conceded to convenience, any field name beginning with "rclmulti" will be taken as an indication that the command returns multiple field values inside a text blob formatted as a recoll configuration file ("fieldname = fieldvalue" lines). The rclmultixx name will be ignored, and field names and values will be parsed from the data. Example: metadatacmds = ; tags = tmsu tags %f; rclmulti1 = cmdOutputsConf %f
cachedirTop directory for Recoll data. Recoll data directories are normally located relative to the configuration directory (e.g. ~/.recoll/xapiandb, ~/.recoll/mboxcache). If 'cachedir' is set, the directories are stored under the specified value instead (e.g. if cachedir is ~/.cache/recoll, the default dbdir would be ~/.cache/recoll/xapiandb). This affects dbdir, webcachedir, mboxcachedir, aspellDicDir, which can still be individually specified to override cachedir. Note that if you have multiple configurations, each must have a different cachedir, there is no automatic computation of a subpath under cachedir.
maxfsoccuppcMaximum file system occupation over which we stop indexing. The value is a percentage, corresponding to what the "Capacity" df output column shows. The default value is 0, meaning no checking.
dbdirXapian database directory location. This will be created on first indexing. If the value is not an absolute path, it will be interpreted as relative to cachedir if set, or the configuration directory (-c argument or $RECOLL_CONFDIR). If nothing is specified, the default is then ~/.recoll/xapiandb/
idxstatusfileName of the scratch file where the indexer process updates its status. Default: idxstatus.txt inside the configuration directory.
mboxcachedirDirectory location for storing mbox message offsets cache files. This is normally 'mboxcache' under cachedir if set, or else under the configuration directory, but it may be useful to share a directory between different configurations.
mboxcacheminmbsMinimum mbox file size over which we cache the offsets. There is really no sense in caching offsets for small files. The default is 5 MB.
mboxmaxmsgmbsMaximum mbox member message size in megabytes. Size over which we assume that the mbox format is bad or we misinterpreted it, at which point we just stop processing the file.
webcachedirDirectory where we store the archived web pages. This is only used by the web history indexing code Default: cachedir/webcache if cachedir is set, else $RECOLL_CONFDIR/webcache
webcachemaxmbsMaximum size in MB of the Web archive. This is only used by the web history indexing code. Default: 40 MB. Reducing the size will not physically truncate the file.
webqueuedirThe path to the Web indexing queue. This used to be hard-coded in the old plugin as ~/.recollweb/ToIndex so there would be no need or possibility to change it, but the WebExtensions plugin now downloads the files to the user Downloads directory, and a script moves them to webqueuedir. The script reads this value from the config so it has become possible to change it.
webdownloadsdirThe path to browser downloads directory. This is where the new browser add-on extension has to create the files. They are then moved by a script to webqueuedir.
webcachekeepintervalPage recycle interval By default, only one instance of an URL is kept in the cache. This can be changed by setting this to a value determining at what frequency we keep multiple instances ('day', 'week', 'month', 'year'). Note that increasing the interval will not erase existing entries.
aspellDicDirAspell dictionary storage directory location. The aspell dictionary (aspdict.(lang).rws) is normally stored in the directory specified by cachedir if set, or under the configuration directory.
filtersdirDirectory location for executable input handlers. If RECOLL_FILTERSDIR is set in the environment, we use it instead. Defaults to $prefix/share/recoll/filters. Can be redefined for subdirectories.
iconsdirDirectory location for icons. The only reason to change this would be if you want to change the icons displayed in the result list. Defaults to $prefix/share/recoll/images
idxflushmbThreshold (megabytes of new data) where we flush from memory to disk index. Setting this allows some control over memory usage by the indexer process. A value of 0 means no explicit flushing, which lets Xapian perform its own thing, meaning flushing every $XAPIAN_FLUSH_THRESHOLD documents created, modified or deleted: as memory usage depends on average document size, not only document count, the Xapian approach is is not very useful, and you should let Recoll manage the flushes. The program compiled value is 0. The configured default value (from this file) is now 50 MB, and should be ok in many cases. You can set it as low as 10 to conserve memory, but if you are looking for maximum speed, you may want to experiment with values between 20 and 200. In my experience, values beyond this are always counterproductive. If you find otherwise, please drop me a note.
filtermaxsecondsMaximum external filter execution time in seconds. Default 1200 (20mn). Set to 0 for no limit. This is mainly to avoid infinite loops in postscript files (loop.ps)
filtermaxmbytesMaximum virtual memory space for filter processes (setrlimit(RLIMIT_AS)), in megabytes. Note that this includes any mapped libs (there is no reliable Linux way to limit the data space only), so we need to be a bit generous here. Anything over 2000 will be ignored on 32 bits machines. The previous default value of 2000 would prevent java pdftk to work when executed from Python rclpdf.py.
thrQSizesStage input queues configuration. There are three internal queues in the indexing pipeline stages (file data extraction, terms generation, index update). This parameter defines the queue depths for each stage (three integer values). If a value of -1 is given for a given stage, no queue is used, and the thread will go on performing the next stage. In practise, deep queues have not been shown to increase performance. Default: a value of 0 for the first queue tells Recoll to perform autoconfiguration based on the detected number of CPUs (no need for the two other values in this case). Use thrQSizes = -1 -1 -1 to disable multithreading entirely.
thrTCountsNumber of threads used for each indexing stage. The three stages are: file data extraction, terms generation, index update). The use of the counts is also controlled by some special values in thrQSizes: if the first queue depth is 0, all counts are ignored (autoconfigured); if a value of -1 is used for a queue depth, the corresponding thread count is ignored. It makes no sense to use a value other than 1 for the last stage because updating the Xapian index is necessarily single-threaded (and protected by a mutex).
loglevelLog file verbosity 1-6. A value of 2 will print only errors and warnings. 3 will print information like document updates, 4 is quite verbose and 6 very verbose.
logfilenameLog file destination. Use 'stderr' (default) to write to the console.
idxloglevelOverride loglevel for the indexer.
idxlogfilenameOverride logfilename for the indexer.
helperlogfilenameDestination file for external helpers standard error output. The external program error output is left alone by default, e.g. going to the terminal when the recoll[index] program is executed from the command line. Use /dev/null or a file inside a non-existent directory to completely suppress the output.
daemloglevelOverride loglevel for the indexer in real time mode. The default is to use the idx... values if set, else the log... values.
daemlogfilenameOverride logfilename for the indexer in real time mode. The default is to use the idx... values if set, else the log... values.
pyloglevelOverride loglevel for the python module.
pylogfilenameOverride logfilename for the python module.
orgidxconfdirOriginal location of the configuration directory. This is used exclusively for movable datasets. Locating the configuration directory inside the directory tree makes it possible to provide automatic query time path translations once the data set has moved (for example, because it has been mounted on another location).
curidxconfdirCurrent location of the configuration directory. Complement orgidxconfdir for movable datasets. This should be used if the configuration directory has been copied from the dataset to another location, either because the dataset is readonly and an r/w copy is desired, or for performance reasons. This records the original moved location before copy, to allow path translation computations. For example if a dataset originally indexed as '/home/me/mydata/config' has been mounted to '/media/me/mydata', and the GUI is running from a copied configuration, orgidxconfdir would be '/home/me/mydata/config', and curidxconfdir (as set in the copied configuration) would be '/media/me/mydata/config'.
idxrundirIndexing process current directory. The input handlers sometimes leave temporary files in the current directory, so it makes sense to have recollindex chdir to some temporary directory. If the value is empty, the current directory is not changed. If the value is (literal) tmp, we use the temporary directory as set by the environment (RECOLL_TMPDIR else TMPDIR else /tmp). If the value is an absolute path to a directory, we go there.
checkneedretryindexscriptScript used to heuristically check if we need to retry indexing files which previously failed. The default script checks the modified dates on /usr/bin and /usr/local/bin. A relative path will be looked up in the filters dirs, then in the path. Use an absolute path to do otherwise.
recollhelperpathAdditional places to search for helper executables. This is used, e.g., on Windows by the Python code, and on Mac OS by the bundled recoll.app (because I could find no reliable way to tell launchd to set the PATH). The example below is for Windows. Use ':' as entry separator for Mac and Ux-like systems, ';' is for Windows only.
idxabsmlenLength of abstracts we store while indexing. Recoll stores an abstract for each indexed file. The text can come from an actual 'abstract' section in the document or will just be the beginning of the document. It is stored in the index so that it can be displayed inside the result lists without decoding the original file. The idxabsmlen parameter defines the size of the stored abstract. The default value is 250 bytes. The search interface gives you the choice to display this stored text or a synthetic abstract built by extracting text around the search terms. If you always prefer the synthetic abstract, you can reduce this value and save a little space.
idxmetastoredlenTruncation length of stored metadata fields. This does not affect indexing (the whole field is processed anyway), just the amount of data stored in the index for the purpose of displaying fields inside result lists or previews. The default value is 150 bytes which may be too low if you have custom fields.
idxtexttruncatelenTruncation length for all document texts. Only index the beginning of documents. This is not recommended except if you are sure that the interesting keywords are at the top and have severe disk space issues.
idxsynonymsName of the index-time synonyms file. This is used for indexing multiword synonyms as single terms, which in turn is only useful if you want to perform proximity searches with such terms.
aspellLanguageLanguage definitions to use when creating the aspell dictionary. The value must match a set of aspell language definition files. You can type "aspell dicts" to see a list The default if this is not set is to use the NLS environment to guess the value. The values are the 2-letter language codes (e.g. 'en', 'fr'...)
aspellAddCreateParamAdditional option and parameter to aspell dictionary creation command. Some aspell packages may need an additional option (e.g. on Debian Jessie: --local-data-dir=/usr/lib/aspell). See Debian bug 772415.
aspellKeepStderrSet this to have a look at aspell dictionary creation errors. There are always many, so this is mostly for debugging.
noaspellDisable aspell use. The aspell dictionary generation takes time, and some combinations of aspell version, language, and local terms, result in aspell crashing, so it sometimes makes sense to just disable the thing.
monauxintervalAuxiliary database update interval. The real time indexer only updates the auxiliary databases (stemdb, aspell) periodically, because it would be too costly to do it for every document change. The default period is one hour.
monixintervalMinimum interval (seconds) between processings of the indexing queue. The real time indexer does not process each event when it comes in, but lets the queue accumulate, to diminish overhead and to aggregate multiple events affecting the same file. Default 30 S.
mondelaypatternsTiming parameters for the real time indexing. Definitions for files which get a longer delay before reindexing is allowed. This is for fast-changing files, that should only be reindexed once in a while. A list of wildcardPattern:seconds pairs. The patterns are matched with fnmatch(pattern, path, 0) You can quote entries containing white space with double quotes (quote the whole entry, not the pattern). The default is empty. Example: mondelaypatterns = *.log:20 "*with spaces.*:30"
idxniceprio"nice" process priority for the indexing processes. Default: 19 (lowest) Appeared with 1.26.5. Prior versions were fixed at 19.
monioniceclassionice class for the indexing process. Despite the misleading name, and on platforms where this is supported, this affects all indexing processes, not only the real time/monitoring ones. The default value is 3 (use lowest "Idle" priority).
monioniceclassdataionice class level parameter if the class supports it. The default is empty, as the default "Idle" class has no levels.
autodiacsensauto-trigger diacritics sensitivity (raw index only). IF the index is not stripped, decide if we automatically trigger diacritics sensitivity if the search term has accented characters (not in unac_except_trans). Else you need to use the query language and the "D" modifier to specify diacritics sensitivity. Default is no.
autocasesensauto-trigger case sensitivity (raw index only). IF the index is not stripped (see indexStripChars), decide if we automatically trigger character case sensitivity if the search term has upper-case characters in any but the first position. Else you need to use the query language and the "C" modifier to specify character-case sensitivity. Default is yes.
maxTermExpandMaximum query expansion count for a single term (e.g.: when using wildcards). This only affects queries, not indexing. We used to not limit this at all (except for filenames where the limit was too low at 1000), but it is unreasonable with a big index. Default 10000.
maxXapianClausesMaximum number of clauses we add to a single Xapian query. This only affects queries, not indexing. In some cases, the result of term expansion can be multiplicative, and we want to avoid eating all the memory. Default 50000.
snippetMaxPosWalkMaximum number of positions we walk while populating a snippet for the result list. The default of 1,000,000 may be insufficient for very big documents, the consequence would be snippets with possibly meaning-altering missing words.
pdfocrAttempt OCR of PDF files with no text content. This can be defined in subdirectories. The default is off because OCR is so very slow.
pdfattachEnable PDF attachment extraction by executing pdftk (if available). This is normally disabled, because it does slow down PDF indexing a bit even if not one attachment is ever found.
pdfextrametaExtract text from selected XMP metadata tags. This is a space-separated list of qualified XMP tag names. Each element can also include a translation to a Recoll field name, separated by a '|' character. If the second element is absent, the tag name is used as the Recoll field names. You will also need to add specifications to the "fields" file to direct processing of the extracted data.
pdfextrametafixDefine name of XMP field editing script. This defines the name of a script to be loaded for editing XMP field values. The script should define a 'MetaFixer' class with a metafix() method which will be called with the qualified tag name and value of each selected field, for editing or erasing. A new instance is created for each document, so that the object can keep state for, e.g. eliminating duplicate values.
ocrprogsOCR modules to try. The top OCR script will try to load the corresponding modules in order and use the first which reports being capable of performing OCR on the input file. Modules for tesseract (tesseract) and ABBYY FineReader (abbyy) are present in the standard distribution. For compatibility with the previous version, if this is not defined at all, the default value is "tesseract". Use an explicit empty value if needed. A value of "abbyy tesseract" will try everything.
ocrcachedirLocation for caching OCR data. The default if this is empty or undefined is to store the cached OCR data under $RECOLL_CONFDIR/ocrcache.
tesseractlangLanguage to assume for tesseract OCR. Important for improving the OCR accuracy. This can also be set through the contents of a file in the currently processed directory. See the rclocrtesseract.py script. Example values: eng, fra... See the tesseract documentation.
tesseractcmdPath for the tesseract command. Do not quote. This is mostly useful on Windows, or for specifying a non-default tesseract command. E.g. on Windows. tesseractcmd = C:/ProgramFiles(x86)/Tesseract-OCR/tesseract.exe
abbyylangLanguage to assume for abbyy OCR. Important for improving the OCR accuracy. This can also be set through the contents of a file in the currently processed directory. See the rclocrabbyy.py script. Typical values: English, French... See the ABBYY documentation.
abbyycmdPath for the abbyy command The ABBY directory is usually not in the path, so you should set this.
This file contains information about dynamic fields
          handling in Recoll. Some
          very basic fields have hard-wired behaviour, and, mostly,
          you should not change the original data inside the
          fields file. But you can
          create custom fields fitting your data and handle them
          just like they were native ones.
The fields file has
          several sections, which each define an aspect of fields
          processing. Quite often, you'll have to modify several
          sections to obtain the desired behaviour.
We will only give a short description here, you should refer to the comments inside the default file for more detailed information.
Field names should be lowercase alphabetic ASCII.
A field becomes indexed (searchable) by having a prefix defined in this section. There is a more complete explanation of what prefixes are in used by a standard recoll installation. In a nutshell: extension prefixes should be all caps, begin with XY, and short. E.g. XYMFLD.
Fields listed in this section will be stored as
                Xapian
                values inside the
                index. This makes them available for range queries,
                allowing to filter results according to the field
                value. This feature currently supports string and
                integer data. See the comments in the file for more
                detail
A field becomes stored (displayable inside results) by having its name listed in this section (typically with an empty value).
This section defines lists of synonyms for the
                canonical names used inside the [prefixes] and [stored] sections
This section also defines aliases for the canonic field names, with the difference that the substitution will only be used at query time, avoiding any possibility that the value would pick-up random metadata from documents.
Some input handlers may need specific
                configuration for handling fields. Only the email
                message handler currently has such a section (named
                [mail]). It allows
                indexing arbitrary email headers in addition to the
                ones indexed by default. Other such sections may
                appear in the future.
Here follows a small example of a personal
          fields file. This would
          extract a specific email header and use it as a
          searchable field, with data displayable inside result
          lists. (Side note: as the email handler does no decoding
          on the values, only plain ascii headers can be indexed,
          and only the first occurrence will be used for headers
          that occur several times).
[prefixes]
        # Index mailmytag contents (with the given prefix)
        mailmytag = XMTAG
        [stored]
        # Store mailmytag inside the document data record (so that it can be
        # displayed - as %(mailmytag) - in result lists).
        mailmytag = 
        [queryaliases]
        filename = fn
        containerfilename = cfn
        [mail]
        # Extract the X-My-Tag mail header, and use it internally with the
        # mailmytag field name
        x-my-tag = mailmytag
        
          Recoll versions 1.19 and later process user extended file attributes as documents fields by default.
Attributes are processed as fields of the same name,
            after removing the user
            prefix on Linux.
The [xattrtofields]
            section of the fields
            file allows specifying translations from extended
            attributes names to Recoll field names. An empty
            translation disables use of the corresponding attribute
            data.
mimemap specifies the
          file name extension to MIME type mappings.
For file names without an extension, or with an
          unknown one, a system command (file -i, or xdg-mime) will be
          executed to determine the MIME type (this can be switched
          off, or the command changed inside the main configuration
          file).
All extension values in mimemap must be entered in lower case.
          File names extensions are lower-cased for comparison
          during indexing, meaning that an upper case mimemap entry will never be
          matched.
The mappings can be specified on a per-subtree basis,
          which may be useful in some cases. Example: okular notes have a .xml extension but should be handled
          specially, which is possible because they are usually all
          located in one place. Example:
[~/.kde/share/apps/okular/docdata]
        .xml = application/x-okular-notes
          The recoll_noindex
          mimemap variable has been
          moved to recoll.conf and
          renamed to noContentSuffixes, while keeping the
          same function, as of Recoll version 1.21. For older
          Recoll versions, see the
          documentation for noContentSuffixes but use recoll_noindex in mimemap.
The main purpose of the mimeconf file is to specify how the
          different MIME types are handled for indexing. This is
          done in the [index] section,
          which should not be modified casually. See the comments
          in the file.
The file also contains other definitions which affect the query language and the GUI, and which, in retrospect, should have been stored elsewhere.
The [icons] section
          allows you to change the icons which are displayed by the
          recoll GUI
          in the result lists (the values are the basenames of the
          png images inside the
          iconsdir directory (which
          is itself defined in recoll.conf).
The [categories] section
          defines the groupings of MIME types into categories as used when adding an
          rclcat clause to a query language query.
          rclcat clauses are also used
          by the default guifilters
          buttons in the GUI (see next).
The filter controls appear at the top of the recoll GUI, either as checkboxes just above the result list, or as a dropbox in the tool area.
By default, they are labeled: media, message, other, presentation, spreadsheet and text, and each maps to a document
          category. This is determined in the [guifilters] section, where each control
          is defined by a variable naming a query language
          fragment.
A simple example will hopefully make things clearer.
[guifilters]
Big Books = dir:"~/My Books" size>10K
My Docs = dir:"~/My Documents"
Small Books = dir:"~/My Books" size<10K
System Docs = dir:/usr/share/doc
        
          The above definition would create four filter
          checkboxes, labelled Big
          Books, My Docs,
          etc.
The text after the equal sign must be a valid query language fragment, and, when the button is checked, it will be combined with the rest of the query with an AND conjunction.
Any name text before a colon character will be erased in the display, but used for sorting. You can use this to display the checkboxes in any order you like. For example, the following would do exactly the same as above, but ordering the checkboxes in the reverse order.
[guifilters]
d:Big Books = dir:"~/My Books" size>10K
c:My Docs = dir:"~/My Documents"
b:Small Books = dir:"~/My Books" size<10K
a:System Docs = dir:/usr/share/doc
        
          As you may have guessed, The default [guifilters] section looks like:
[guifilters]
text = rclcat:text
spreadsheet = rclcat:spreadsheet
presentation = rclcat:presentation
media = rclcat:media
message = rclcat:message
other = rclcat:other
        
        mimeview specifies which
          programs are started when you click on an Open link in a result list. Ie: HTML is
          normally displayed using firefox, but you may prefer
          Konqueror, your
          openoffice.org program
          might be named oofice instead of
          openoffice
          etc.
Changes to this file can be done by direct editing, or through the recoll GUI preferences dialog.
If Use desktop preferences to
          choose document editor is checked in the
          Recoll GUI preferences,
          all mimeview entries will
          be ignored except the one labelled application/x-all (which is set to use
          xdg-open by
          default).
In this case, the xallexcepts top level variable defines a
          list of MIME type exceptions which will be processed
          according to the local entries instead of being passed to
          the desktop. This is so that specific Recoll options such as a page number
          or a search string can be passed to applications that
          support them, such as the evince viewer.
As for the other configuration files, the normal usage
          is to have a mimeview
          inside your own configuration directory, with just the
          non-default entries, which will override those from the
          central configuration file.
All viewer definition entries must be placed under a
          [view] section.
The keys in the file are normally MIME types. You can
          add an application tag to specialize the choice for an
          area of the filesystem (using a localfields specification in
          mimeconf). The syntax for
          the key is mimetype|tag
The nouncompforviewmts
          entry, (placed at the top level, outside of the
          [view] section), holds a
          list of MIME types that should not be uncompressed before
          starting the viewer (if they are found compressed, ie:
          mydoc.doc.gz).
The right side of each assignment holds a command to be executed for opening the file. The following substitutions are performed:
%D. Document date
%f. File name. This may be the name of a temporary file if it was necessary to create one (ie: to extract a subdocument from a container).
%i. Internal path, for subdocuments of containers. The format depends on the container type. If this appears in the command line, Recoll will not create a temporary file to extract the subdocument, expecting the called application (possibly a script) to be able to handle it.
%M. MIME type
%p. Page index. Only significant for a subset of document types, currently only PDF, Postscript and DVI files. Can be used to start the editor at the right page for a match or snippet.
%s. Search term. The value will only be set for documents with indexed page numbers (ie: PDF). The value will be one of the matched search terms. It would allow pre-setting the value in the "Find" entry inside Evince for example, for easy highlighting of the term.
%u. Url.
In addition to the predefined values above, all
          strings like %(fieldname)
          will be replaced by the value of the field named
          fieldname for the document.
          This could be used in combination with field
          customisation to help with opening the document.
ptrans specifies
          query-time path translations. These can be useful in
          multiple cases.
The file has a section for any index which needs translations, either the main one or additional query indexes. The sections are named with the Xapian index directory names. No slash character should exist at the end of the paths (all comparisons are textual). An example should make things sufficiently clear
          [/home/me/.recoll/xapiandb]
          /this/directory/moved = /to/this/place
          [/path/to/additional/xapiandb]
          /server/volume1/docdir = /net/server/volume1/docdir
          /server/volume2/docdir = /net/server/volume2/docdir
        
        Imagine that you have some kind of file which does
            not have indexable content, but for which you would
            like to have a functional Open link in the result list (when
            found by file name). The file names end in .blob and can be
            displayed by application blobviewer.
You need two entries in the configuration files for this to work:
In $RECOLL_CONFDIR/mimemap
                  (typically ~/.recoll/mimemap), add the
                  following line:
            .blob = application/x-blobapp
          
                  Note that the MIME type is made up here, and
                  you could call it diesel/oil just
                  the same.
In $RECOLL_CONFDIR/mimeview under
                  the [view] section,
                  add:
              application/x-blobapp = blobviewer %f
            
                  We are supposing that blobviewer wants
                  a file name parameter here, you would use
                  %u if it liked URLs
                  better.
If you just wanted to change the application used by
            Recoll to display a
            MIME type which it already knows, you would just need
            to edit mimeview. The
            entries you add in your personal file override those in
            the central configuration, which you do not need to
            alter. mimeview can also
            be modified from the Gui.
Let us now imagine that the above .blob files actually
            contain indexable text and that you know how to extract
            it with a command line program. Getting Recoll to index the files is easy.
            You need to perform the above alteration, and also to
            add data to the mimeconf
            file (typically in ~/.recoll/mimeconf):
Under the [index]
                  section, add the following line (more about the
                  rclblob
                  indexing script later):
application/x-blobapp = exec rclblob
Or if the files are mostly text and you don't need to process them for indexing:
application/x-blobapp = internal text/plain
Under the [icons]
                  section, you should choose an icon to be
                  displayed for the files inside the result lists.
                  Icons are normally 64x64 pixels PNG files which
                  live in /usr/share/recoll/images.
Under the [categories] section, you should
                  add the MIME type where it makes sense (you can
                  also create a category). Categories may be used
                  for filtering in advanced search.
The rclblob handler should
            be an executable program or script which exists inside
            /usr/share/recoll/filters. It will be
            given a file name as argument and should output the
            text or html contents on the standard output.
The filter programming section describes in more detail how to write an input handler.